Mounting pillars and screwholes to join top and bottom cases

notebook_nueva/modelo.py

@@ -21,7 +21,9 @@ thickness = 20 + shell_t  # 20 inside
 ti_radius = 2.35
 ti_depth = 6.25
 
-pillars = (
+# Positions are determined by measuring the keyboard
+# mounting holes
+kbd_pillars = (
     cq.Sketch()
     .push(
         [
@@ -34,9 +36,30 @@ pillars = (
         ]
     )
     .circle(6, mode="a")
+    # Holes for M3 threaded inserts
     .circle(ti_radius, mode="s")
 )
 
+# These are placed where convenient, and are used to join the top and bottom
+# parts of the case.
+# Measured from top-left corner OUTSIDE
+mounting_pillar_positions = [
+    (6, -6),
+    (width - 6, -6),
+    (width - 6, -40),
+    (120, -6),
+    (170, -6),
+]
+
+mounting_pillars = (
+    cq.Sketch()
+    .push(mounting_pillar_positions)
+    .trapezoid(12, 12, 90, mode="a")
+    .circle(1.5, mode="s")
+)
+
+screw_holes = cq.Sketch().push(mounting_pillar_positions).circle(3, mode="a")
+
 battery_holder = (
     cq.Sketch()
     .polygon(
@@ -49,6 +72,11 @@ battery_holder = (
         [(-67, 3), (0, 3), (0, -10), (-67, -10), (-67, 3)],
         mode="s",
     )
+    # Cutout for the
+    .polygon(
+        [(-67, 30), (0, 30), (0, 12), (-67, 12), (-67, 30)],
+        mode="s",
+    )
 )
 
 
@@ -57,6 +85,9 @@ usb_in = cq.Sketch().trapezoid(13, 5.5, 90, mode="a")
 switch_in = cq.Sketch().trapezoid(13.5, 8, 90, mode="a")
 
 
+# Motherboard mount
+
+
 def model():
     return (
         cq.Workplane("XY")
@@ -88,7 +119,7 @@ def model():
         # Hole for power switch
         .faces(">Y")
         .workplane(centerOption="CenterOfBoundBox")
-        .center(-height / 2 + shell_t + 50, 0)
+        .center(0, 0)
         .placeSketch(switch_in)
         .cutBlind(-shell_t)
         # Slanted mounting pillars on the kbd top
@@ -98,7 +129,7 @@ def model():
         .center(-width / 2 + shell_t, kbd_height - height / 2 + shell_t)
         .transformed(rotate=cq.Vector(kbd_angle, 0, 0))
         .tag("sloped")
-        .placeSketch(pillars)
+        .placeSketch(kbd_pillars)
         .extrude(-1000)
         # Remove the excess extrusion
         .workplaneFromTagged("mid_height")
@@ -107,48 +138,63 @@ def model():
         # Slope for the beyboard
         .workplaneFromTagged("sloped")
         .split(keepBottom=True)
+        # Pillars to join with top half
+        .workplaneFromTagged("mid_height")
+        .workplane(offset=-thickness / 2, centerOption="CenterOfBoundBox")
+        .center(-width / 2, height / 2)
+        .placeSketch(mounting_pillars)
+        .extrude(thickness)
+        # Holes to insert screws from the bottom
+        .workplaneFromTagged("mid_height")
+        .workplane(offset=-thickness / 2, centerOption="CenterOfBoundBox")
+        .center(-width / 2, height / 2)
+        .placeSketch(screw_holes)
+        # 13 is 20-7 (screw thread length - threaded insert depth)
+        .cutBlind(thickness - 13)
     )
 
 
-left_cutout = cq.Sketch().polygon(
+if __name__ == "__main__":
-    [(0, 0), (160, 0), (160, -100), (135, -100), (135, -200), (0, -200), (0, 0)],
-    mode="a",
-)
 
-right_side = (
+    left_cutout = cq.Sketch().polygon(
-    model()
+        [(0, 0), (160, 0), (160, -100), (135, -100), (135, -200), (0, -200), (0, 0)],
-    .faces("<Z")
+        mode="a",
-    .workplaneFromTagged("mid_height")
+    )
-    .transformed(offset=cq.Vector(0, 0, -thickness / 2))
-    .center(-width / 2, height / 2)
-    .placeSketch(left_cutout)
-    .cutBlind(100)
-)
 
-exporters.export(right_side, "right_side.stl")
+    right_side = (
+        model()
+        .faces("<Z")
+        .workplaneFromTagged("mid_height")
+        .transformed(offset=cq.Vector(0, 0, -thickness / 2))
+        .center(-width / 2, height / 2)
+        .placeSketch(left_cutout)
+        .cutBlind(100)
+    )
 
-right_cutout = cq.Sketch().polygon(
+    exporters.export(right_side, "right_side.stl")
-    [
-        (160, 0),
-        (width, 0),
-        (width, -height),
-        (135, -height),
-        (135, -100),
-        (160, -100),
-        (160, 0),
-    ],
-    mode="a",
-)
 
-left_side = (
+    right_cutout = cq.Sketch().polygon(
-    model()
+        [
-    .faces("<Z")
+            (160, 0),
-    .workplaneFromTagged("mid_height")
+            (width, 0),
-    .transformed(offset=cq.Vector(0, 0, -thickness / 2))
+            (width, -height),
-    .center(-width / 2, height / 2)
+            (135, -height),
-    .placeSketch(right_cutout)
+            (135, -100),
-    .cutBlind(100)
+            (160, -100),
-)
+            (160, 0),
-exporters.export(left_side, "left_side.stl")
+        ],
+        mode="a",
+    )
 
-exporters.export(model(), "model.stl")
+    left_side = (
+        model()
+        .faces("<Z")
+        .workplaneFromTagged("mid_height")
+        .transformed(offset=cq.Vector(0, 0, -thickness / 2))
+        .center(-width / 2, height / 2)
+        .placeSketch(right_cutout)
+        .cutBlind(100)
+    )
+    exporters.export(left_side, "left_side.stl")
+
+    exporters.export(model(), "model.stl")

notebook_nueva/screen_mount.py

@@ -1,21 +1,19 @@
 import cadquery2 as cq
 from cadquery2 import exporters
 
-# Some dimensions copied from modelo.py,
+from modelo import (
-# TODO refactor into a separate file
+    kbd_height,
-
+    kbd_width,
-# Thickness of the outer material
+    mounting_pillar_positions,
-shell_t = 3
+    shell_t,
-
+    ti_depth,
-# Size of the kbd board
+    ti_radius,
-kbd_height = 98
+)
-kbd_width = 286
-kbd_angle = 5
 
 # Size of the whole object
 width = kbd_width + 2 * shell_t
-height = 69
+height = 59
-thickness = 10
+thickness = 62  # Will be shorter after construction
 
 # Visible screen size
 vis_w = 220
@@ -40,13 +38,20 @@ board_cutout = cq.Sketch().trapezoid(
 
 kbd_cable_hole = cq.Sketch().trapezoid(15, 5, 90, mode="a").vertices().fillet(1)
 
+mounting_pillars = (
+    cq.Sketch()
+    .push(mounting_pillar_positions)
+    .trapezoid(12, 12, 90, mode="a")
+    .circle(ti_radius, mode="s")
+)
+
 
 def model():
     return (
         cq.Workplane("XY")
         .workplane()
         .tag("mid_height")
-        .box(width, 59, 62)
+        .box(width, height, thickness)
         # The screen goes at a 45 degree angle
         .faces(">Z")
         .transformed(rotate=(45, 0, 0))
@@ -76,7 +81,8 @@ def model():
         .cutBlind(100)
         # Make it hollow
         .faces("<Z")
-        .shell(-2.5)
+        # Can't be exactly shell_t because cq fails
+        .shell(-shell_t + 0.01)
         # Cut hole for the screen board and cables
         .workplaneFromTagged("slanted")
         .workplane(offset=-scr_thickness, centerOption="CenterOfBoundBox")
@@ -88,9 +94,15 @@ def model():
         # Make small hole for the keyboard cable
         .faces(">Y")
         .workplane(offset=-5, centerOption="CenterOfBoundBox")
-        .center(width / 2 - 128, -23)
+        .center(-width / 2 + 128, -23)
         .placeSketch(kbd_cable_hole)
         .cutBlind(-1000)
+        # Pillars to join with bottom half
+        .workplaneFromTagged("mid_height")
+        .workplane(offset=-thickness / 2, centerOption="CenterOfBoundBox")
+        .center(-width / 2, height / 2)
+        .placeSketch(mounting_pillars)
+        .extrude(10)
     )
 
 
@@ -99,7 +111,7 @@ exporters.export(model(), "screen_mount.stl")
 right_side = (
     model()
     .faces(">X")
-    .workplane(centerOption="CenterOfBoundBox", offset=-140)
+    .workplane(centerOption="CenterOfBoundBox", offset=-width / 2)
     .center(0, height / 2)
     .split(keepTop=True)
 )
@@ -109,7 +121,7 @@ exporters.export(right_side, "right_screen_mount.stl")
 left_side = (
     model()
     .faces(">X")
-    .workplane(centerOption="CenterOfBoundBox", offset=-140)
+    .workplane(centerOption="CenterOfBoundBox", offset=-width / 2)
     .center(0, height / 2)
     .split(keepBottom=True)
 )