diff --git a/notebook_nueva/audio_plug.py b/notebook_nueva/audio_plug.py
index d064475..1f09e5b 100644
--- a/notebook_nueva/audio_plug.py
+++ b/notebook_nueva/audio_plug.py
@@ -1,7 +1,10 @@
 # Hole to expose a USB audio card (YMMV)
 
-# The hole is for a USB-A plug, y is measured in the hub
-# (from the bottom face to middle of the hole)
+import cadquery as cq
+
+from utils import punch_hole2, extrude_shape2
+
+# The hole is for a random USB sound card.
 # Consumers should set proper offsets for the hole
 
 holes = [
@@ -9,8 +12,39 @@ holes = [
     {
         "x": 0,
         "y": 4,
-        "height": 6,
-        "width": 17,
-        "fillet": 2,
+        "shape": cq.Sketch().trapezoid(17, 2, 90, mode="a").fillet(2),
     },
 ]
+
+
+def add(
+    *,
+    model,
+    width,
+    height,
+    thickness,
+    offset_x,
+    offset_y,
+    bottom_face,
+    back_face,
+    shell_t
+):
+
+    # Holes
+    if back_face:
+        for hole in holes:
+            model = punch_hole2(
+                model=model,
+                face=back_face,
+                # FIXME: This is weird because it's the RIGHT side,
+                # So it's height instead of w
+                # need to work on making these coherent
+                w=height,
+                h=thickness,
+                x_offset=offset_x - 17 / 2,
+                y_offset=shell_t,
+                hole=hole,
+                depth=shell_t,
+            )
+
+    return model
diff --git a/notebook_nueva/model.stl b/notebook_nueva/model.stl
index 1e6c447..c63f42e 100644
Binary files a/notebook_nueva/model.stl and b/notebook_nueva/model.stl differ
diff --git a/notebook_nueva/modelo.py b/notebook_nueva/modelo.py
index 6e18034..a7ec7a6 100644
--- a/notebook_nueva/modelo.py
+++ b/notebook_nueva/modelo.py
@@ -180,17 +180,17 @@ def model():
         )
 
     # Hole for audio in right side
-    for hole in audio_plug.holes:
-        model = punch_hole(
-            model=model,
-            face=">X",
-            w=height,
-            h=thickness,
-            x_offset=height - shell_t - 34.5 - audio_plug.holes[0]["width"] / 2,
-            y_offset=shell_t,
-            hole=hole,
-            depth=shell_t,
-        )
+    model = audio_plug.add(
+        model=model,
+        width=width,
+        height=height,
+        thickness=thickness,
+        offset_x=111,  # Offset from the front-left corner
+        offset_y=0,  # Offset from the bottom
+        bottom_face=None,
+        back_face=">X",
+        shell_t=shell_t,
+    )
 
     model = cpu_holder.add(
         model=model,
diff --git a/notebook_nueva/right_side.stl b/notebook_nueva/right_side.stl
index 8372d2e..564a55c 100644
Binary files a/notebook_nueva/right_side.stl and b/notebook_nueva/right_side.stl differ
diff --git a/notebook_nueva/utils.py b/notebook_nueva/utils.py
index baed6c9..29659ac 100644
--- a/notebook_nueva/utils.py
+++ b/notebook_nueva/utils.py
@@ -26,6 +26,16 @@ def punch_hole(*, model, face, w, h, x_offset, y_offset, hole, depth):
     )
 
 
+def extrude_shape2(*, model, face, w, h, x_offset, y_offset, hole, depth):
+    return (
+        model.faces(face)
+        .workplane(centerOption="CenterOfBoundBox")
+        .center(-w / 2 + x_offset + hole["x"], -h / 2 + y_offset + hole["y"])
+        .placeSketch(hole["shape"])
+        .extrude(-depth)
+    )
+
+
 def punch_hole2(*, model, face, w, h, x_offset, y_offset, hole, depth):
     return (
         model.faces(face)
@@ -35,6 +45,7 @@ def punch_hole2(*, model, face, w, h, x_offset, y_offset, hole, depth):
         .cutBlind(-depth)
     )
 
+
 def hex_vents(*, size, width, height):
     vent_positions = []
     for x in range(1, width // size):
@@ -53,4 +64,4 @@ def hex_vents(*, size, width, height):
         }
     ]
 
-    return vents
\ No newline at end of file
+    return vents