Split in quad

guardacosas/modelo.py

@@ -1,37 +0,0 @@
-import cadquery2 as cq
-from cadquery2 import exporters
-
-
-# The hole for the "peg" where this goes
-peg_front = 9.5
-peg_side = 9
-peg_height = 12
-
-# General size of the handle
-width = 20
-length = 70
-height = 16
-
-# General shape of the handle seen from above
-
-handle_shape_top = cq.Sketch().trapezoid(width, length, 85).vertices().fillet(3)
-hole_shape = cq.Sketch().trapezoid(peg_front, peg_side, 90)
-bottom_cutout = cq.Sketch().trapezoid(width, length - width, 90)
-
-handle = (
-    cq.Workplane("XY")
-    .placeSketch(handle_shape_top)
-    .extrude(height)
-    .faces("<Z")
-    .workplane(centerOption="CenterOfBoundBox")
-    .center(0, length/2 - width/2)
-    .placeSketch(hole_shape)
-    .cutBlind(-peg_height)
-    .faces("<Z")
-    .workplane(centerOption="CenterOfBoundBox")
-    .center(0, -width/2)
-    .placeSketch(bottom_cutout)
-    .cutBlind(-height/2)
-)
-
-exporters.export(handle, "guardacosas.stl")

notebook_nueva/modelo.py

@@ -36,36 +36,67 @@ pillars = (
 )
 
 
-model = (
-    cq.Workplane("XY")
-    .workplane(offset=thickness / 2)
-    .tag("mid_height")
-    # Hollow box
-    .box(width, height, thickness)
-    .edges("|Z")
-    .fillet(2)
-    .faces(">Z")
-    .shell(-shell_t)
-    # Make the lower part solid to mount the kbd
-    # .faces("<Z")
-    # .workplane(centerOption="CenterOfBoundBox", offset=-thickness / 2)
-    # .center(0, height * 0.5 - 20)
-    # .box(width, 40, thickness)
-    # # Mounting pillars on the kbd top
-    .faces(">Z")
-    .workplane(centerOption="CenterOfBoundBox")
-    .center(-width/2, 17)
-    .transformed(rotate=cq.Vector(kbd_angle, 0, 0))
-    .tag("sloped")
-    .placeSketch(pillars)
-    .extrude(-1000)
-    # Remove the excess extrusion
-    .workplaneFromTagged("mid_height")
-    .transformed(offset=cq.Vector(0, 0, -thickness / 2))
-    .split(keepTop=True)
-    # Slope for the beyboard
-    .workplaneFromTagged("sloped")
-    .split(keepBottom=True)
-)
+def model():
+    return (
+        cq.Workplane("XY")
+        .workplane(offset=thickness / 2)
+        .tag("mid_height")
+        # Hollow box
+        .box(width, height, thickness)
+        .edges("|Z")
+        .fillet(2)
+        .faces(">Z")
+        .shell(-shell_t)
+        # Slanted mounting pillars on the kbd top
+        .faces(">Z")
+        .workplane(centerOption="CenterOfBoundBox")
+        .center(-width / 2, 17)
+        .transformed(rotate=cq.Vector(kbd_angle, 0, 0))
+        .tag("sloped")
+        .placeSketch(pillars)
+        .extrude(-1000)
+        # Remove the excess extrusion
+        .workplaneFromTagged("mid_height")
+        .transformed(offset=cq.Vector(0, 0, -thickness / 2))
+        .split(keepTop=True)
+        # Slope for the beyboard
+        .workplaneFromTagged("sloped")
+        .split(keepBottom=True)
+    )
+
+top_right = (
+    model()
+    .faces(">Y")
+    .workplane(offset = -120).split(keepTop=True)
+    .faces(">X")
+    .workplane(offset=-135).split(keepTop=True)
+)
+exporters.export(top_right, "top_right.stl")
+
+top_left = (
+    model()
+    .faces(">Y")
+    .workplane(offset = -120).split(keepTop=True)
+    .faces(">X")
+    .workplane(offset=-135).split(keepBottom=True)
+)
+exporters.export(top_left, "top_left.stl")
+
+bottom_right = (
+    model()
+    .faces(">Y")
+    .workplane(offset = -120).split(keepBottom=True)
+    .faces(">X")
+    .workplane(offset=-165).split(keepTop=True)
+)
+exporters.export(bottom_right, "bottom_right.stl")
+
+bottom_left = (
+    model()
+    .faces(">Y")
+    .workplane(offset = -120).split(keepBottom=True)
+    .faces(">X")
+    .workplane(offset=-165).split(keepBottom=True)
+)
+exporters.export(bottom_left, "bottom_left.stl")
 
-exporters.export(model, "model.stl")