cadquery/notebook_nueva/hinged_lid.py

import cadquery as cq
from cadquery import exporters

from modelo import (
    height,
    mounting_pillar_positions,
    ti_depth,
    ti_radius,
    width,
    thickness as model_thickness,
    shell_t,
)

import keyboard
import screen_mount

hinge_radius = 5.5
screw_radius = 1.5  # M3
ring_radius = 5  # M3
hinge_offset = max(p[1] for p in mounting_pillar_positions) + 6
hinge_width = 25
thickness = 42

# This is a constant used to control how far back the hinges go
# when open. It's arbitrary and can be adjusted experimentally
# printing small samples
hinge_slant = shell_t + 2


def model():
    # Create a 2-part hinged lid

    model = (
        cq.Workplane("XY")
        # Hollow box
        .workplane(offset=-thickness / 2)
        .box(width, height, thickness)
        .edges("<Y and >Z")
        .fillet(10)
        .edges(">Y and >Z")
        .fillet(5)
        .faces("<Z")
        .shell(-shell_t)
        # Outer surface of the hinge
        .faces(">X")
        .workplane(centerOption="CenterOfBoundBox")
        .center(height / 2 - hinge_offset, thickness / 2 - hinge_radius)
        .tag("rightSide")
        .placeSketch(cq.Sketch().circle(hinge_radius))
        .extrude(-width)
        # Cut middle section between the hinges
        .workplaneFromTagged("rightSide")
        .workplane(offset=-hinge_width)
        .placeSketch(
            cq.Sketch().polygon(
                [
                    (-hinge_radius, -hinge_radius),
                    (-hinge_radius, 0),
                    (-hinge_radius - hinge_slant, hinge_radius),
                    (-hinge_slant, hinge_radius),
                    (-hinge_slant, hinge_radius - hinge_slant),
                    (hinge_radius, hinge_radius - hinge_slant),
                    (hinge_radius, -hinge_radius),
                    (-hinge_radius, -hinge_radius),
                ]
            )
        )
        .cutBlind(-width + 2 * hinge_width - 1)
        # Hole for screws
        .workplaneFromTagged("rightSide")
        .placeSketch(cq.Sketch().circle(screw_radius))
        .cutBlind(-width)
        # Holes for rings & screw heads
        .workplaneFromTagged("rightSide")
        .placeSketch(cq.Sketch().circle(ring_radius))
        .cutBlind(-5)
        .workplaneFromTagged("rightSide")
        .workplane(offset=-width + 4)
        .placeSketch(cq.Sketch().circle(ring_radius))
        .cutBlind(-5)
        # Split hinge halves
        .faces(">X")
        .workplaneFromTagged("rightSide")
        .workplane(offset=-hinge_width / 2)
        .placeSketch(cq.Sketch().trapezoid(hinge_radius * 2 + 1, hinge_radius * 2, 90))
        .cutBlind(-1)
        .workplaneFromTagged("rightSide")
        .workplane(offset=-hinge_width)
        .placeSketch(cq.Sketch().trapezoid(hinge_radius * 2 + 1, hinge_radius * 2, 90))
        .cutBlind(-1)
        .workplaneFromTagged("rightSide")
        .workplane(offset=-width + hinge_width / 2)
        .placeSketch(cq.Sketch().trapezoid(hinge_radius * 2 + 1, hinge_radius * 2, 90))
        .cutBlind(-1)
        .workplaneFromTagged("rightSide")
        .workplane(offset=-width + hinge_width)
        .placeSketch(cq.Sketch().trapezoid(hinge_radius * 2 + 1, hinge_radius * 2, 90))
        .cutBlind(-1)
        # Threaded inserts
        .workplaneFromTagged("rightSide")
        .workplane(offset=-hinge_width / 2)
        .placeSketch(cq.Sketch().circle(ti_radius))
        .cutBlind(-ti_depth)
        .workplaneFromTagged("rightSide")
        .workplane(offset=-width + hinge_width / 2)
        .placeSketch(cq.Sketch().circle(ti_radius))
        .cutBlind(ti_depth)
        # Split two halves
        # First cut for the right hinge
        .workplaneFromTagged("rightSide")
        .placeSketch(
            cq.Sketch()
            .polygon(
                [
                    (0, 0),
                    (-hinge_radius - 0.2, 0),
                    (-hinge_radius - hinge_slant, hinge_radius),
                    (0, hinge_radius),
                    (0, 0),
                ]
            )
            .polygon(
                [
                    (-hinge_radius - 0.2, 0),
                    (-hinge_radius - 0.2, -1000),
                    (-hinge_radius, -1000),
                    (-hinge_radius, 0),
                    (-hinge_radius - 0.2, 0),
                ]
            )
            .circle(hinge_radius, mode="s")
        )
        .cutBlind(-hinge_width / 2 - 1)
        # Second cut for the right hinge
        .workplaneFromTagged("rightSide")
        .workplane(offset=-hinge_width / 2)
        .placeSketch(
            cq.Sketch()
            .polygon(
                [
                    (0, 0),
                    (hinge_radius + 0.2, 0),
                    (hinge_radius + 0.2 + hinge_slant, hinge_radius),
                    (0, hinge_radius),
                    (0, 0),
                ]
            )
            .circle(hinge_radius, mode="s")
        )
        .cutBlind(-hinge_width / 2 - 1)
        # First cut for the left hinge
        .workplaneFromTagged("rightSide")
        .workplane(offset=-width + hinge_width)
        .placeSketch(
            cq.Sketch()
            .polygon(
                [
                    (0, 0),
                    (hinge_radius + 0.2, 0),
                    (hinge_radius + 0.2 + hinge_slant, hinge_radius),
                    (0, hinge_radius),
                    (0, 0),
                ]
            )
            .circle(hinge_radius, mode="s")
        )
        .cutBlind(-hinge_width / 2 - 1)
        # Second cut for the left hinge
        .workplaneFromTagged("rightSide")
        .workplane(offset=-width + hinge_width / 2)
        .placeSketch(
            cq.Sketch()
            .polygon(
                [
                    (0, 0),
                    (-hinge_radius - 0.2, 0),
                    (-hinge_radius - hinge_slant, hinge_radius),
                    (0, hinge_radius),
                    (0, 0),
                ]
            )
            .polygon(
                [
                    (-hinge_radius - 0.2, 0),
                    (-hinge_radius - 0.2, -1000),
                    (-hinge_radius, -1000),
                    (-hinge_radius, 0),
                    (-hinge_radius - 0.2, 0),
                ]
            )
            .circle(hinge_radius, mode="s")
        )
        .cutBlind(-hinge_width / 2 - 1)
    )

    # Cut off shape of the base

    model = (
        model.workplaneFromTagged("rightSide")
        .center(-height + hinge_offset, -thickness + hinge_radius)
        .placeSketch(
            cq.Sketch().polygon(
                [
                    (0, 0),
                    (0, keyboard.front_thickness),
                    (shell_t, keyboard.front_thickness),
                    (keyboard.actual_height + shell_t, keyboard.back_thickness),
                    (keyboard.actual_height + shell_t, model_thickness),
                    (height, model_thickness),
                    (height, 0),
                    (0, 0),
                ]
            )
        )
        .cutBlind(-1000)
    )

    return model


if __name__ == "__main__":
    model = model()

    exporters.export(model, "hinged_lid.stl")

    exporters.export(
        model,
        "hinged_lid.svg",
        opt={
            "projectionDir": (0, 0, 1),
            "strokeWidth": 0.3,
        },
    )