4f2c1e35f6
Redesigned screen holder for 30 degree screen
2023-01-27 15:43:54 -03:00
1e89b41995
Redesigned screen holder for 30 degree screen
2023-01-27 15:32:04 -03:00
37d96b0e4f
Bring the keyboard 1.5 mm lower INTO the case
2023-01-27 13:16:09 -03:00
b85ba1f3e1
2-level kbd mounting pillars
2023-01-27 11:23:04 -03:00
a6d3f32797
larger hole for kbd mounting screws
2023-01-27 11:16:40 -03:00
92291013c6
Smaller kbd pillars, fix base splitting
2023-01-26 15:11:16 -03:00
d048e19cec
Starting rev 2
...
* Adjusted sizes and other parameters for the new 65% keyboard
* Commented battery holder (waiting on the 18650 charger)
2023-01-26 11:08:58 -03:00
bebc4d5729
Move keyboard cable hole 6mm to the left
2022-12-02 11:26:52 -03:00
26dc83baf9
Larger kbd cable hole makes shape simpler
2022-12-02 10:05:27 -03:00
29e2464bef
Bring back missing screen mounting pillar
2022-12-02 10:04:23 -03:00
4386b1c017
Split the screen mount so it needs fewer supports
2022-12-01 15:20:57 -03:00
8058118491
Slightly larger hole for power switch
2022-12-01 12:29:33 -03:00
4279547773
Refactor screen_mount script a bit
2022-11-30 14:29:42 -03:00
e4a011f5bd
Single mounting beam at the back
2022-11-30 07:43:14 -03:00
a2932a4e49
Screw heads are a bit bigger than expected
2022-11-29 09:27:15 -03:00
2a48edb3cf
Mounting pillars and screwholes to join top and bottom cases
2022-11-28 15:09:49 -03:00
f549fb32b0
Thicker walls
2022-11-28 12:19:56 -03:00
db5e874d91
Fix screen holder split, add cutout for kbd cable
2022-11-28 11:26:23 -03:00
f01e5a92ee
bump
2022-11-28 10:36:18 -03:00
59882af24f
Shorter screen holder, rounded top, screen slightly slower
2022-11-25 18:15:42 -03:00
6e8869363e
Refactor, comments
2022-11-25 17:11:31 -03:00
bf1f0cc4ce
Missing files, screen mount simplified
2022-11-25 14:46:30 -03:00
e9b3a42564
More work on the screen mount
2022-11-25 12:28:39 -03:00
b8d902ea11
Basic screen bezels
2022-11-24 17:45:59 -03:00
8534d25e4b
Make the stand a bit taller to allow cable to pass below
2022-11-24 14:45:43 -03:00
8b152fc844
Make the stand a bit taller to allow cable to pass below
2022-11-24 14:44:17 -03:00
c5b2d68518
Prototype CPU holder
2022-11-24 11:24:38 -03:00
18a8e9a904
Add power switch hole
2022-11-24 10:30:05 -03:00
85d4fb661f
Built
2022-11-24 09:55:09 -03:00
c127e5f34b
Thicker walls in the battery holder
2022-11-24 09:54:11 -03:00
f9987f43e9
kbd width was wrong
2022-11-24 09:51:53 -03:00
6f15cd32d5
battery holder tweak
2022-11-24 09:51:40 -03:00
6e01b44b52
USB inlet port
2022-11-23 10:25:10 -03:00
897e314f9e
* Round stands
...
* Battery holder
* Power cable cutoff
* Dimensional fixes
2022-11-22 15:41:47 -03:00
df1ee0d425
Make it fit in the printer
2022-11-15 16:04:54 -03:00
4114adb49a
Split in cadquery
2022-11-15 16:01:20 -03:00
c4bae182c6
Split in quad
2022-11-15 15:24:52 -03:00
9f295d921e
Split in quad
2022-11-15 15:24:45 -03:00
19c8679df0
Basic case with kbd standoffs, good for a dry fit
2022-11-15 15:03:48 -03:00
4267a8a384
Modelo de canilla para la cocina
2022-11-09 10:24:23 -03:00
ad79dd78ed
Slightly bigger cable hole
2022-08-05 11:50:07 -03:00
8dc599ba23
Cable clamp for multiple cables fastened with m3x8 screws
2022-08-05 10:08:17 -03:00
ed989fa000
* Wider / deeper channel to slide the plugs in
...
* Had miscalculated bezels, it seems.
2022-07-24 17:36:12 -03:00
0f90755ed2
Simpler rear mount
2022-07-24 15:05:31 -03:00
c2caea9039
Large design change.
...
While not as pretty this should work much better mechanically
based on the results from the last test print.
* Added room for the plugs to slide from the middle outwards
* Made back reinforcement much larger so it connects the piece that is
split by that plug channel
* Removed separate board cutout (not needed anymore)
* Fix cable channel (was cutting through end caps)
* Change shelling parameters so it keeps a cap on both ends
* Adjusted segment breaks for new reality
* TODO: adjust rear hinge design to be flat and not "envolving"
2022-07-24 11:11:16 -03:00
4a4d11bd95
merged
2022-07-24 10:31:48 -03:00
d0c1a2cdae
Create STL for case pieces too
2022-07-24 10:30:22 -03:00
0b605c19fe
merged
2022-07-24 10:30:03 -03:00
28131b370e
Started plug cutout
2022-07-24 10:29:07 -03:00
5dd7b5578f
tweaks
2022-07-23 16:12:56 -03:00
