Hacky hinged lid WIP

notebook_nueva/audio_plug.py

@@ -1,16 +1,86 @@
 # Hole to expose a USB audio card (YMMV)
 
-# The hole is for a USB-A plug, y is measured in the hub
-# (from the bottom face to middle of the hole)
+import cadquery as cq
+
+from utils import extrude_shape, punch_hole
+
+# The hole is for a random USB sound card.
 # Consumers should set proper offsets for the hole
 
+item_w = 49
+item_h = 20.5
+
+hole_w = 17
+hole_h = 5
+
 holes = [
     # 2-jack plug
     {
-        "x": 0,
+        "x": -item_h / 2,
         "y": 4,
-        "height": 6,
-        "width": 17,
-        "fillet": 2,
+        "shape": cq.Sketch()
+        .trapezoid(hole_w, hole_h, 90, mode="a")
+        .vertices()
+        .fillet(2),
     },
 ]
+
+elements = [
+    # Outline
+    {
+        "x": item_w / 2,
+        "y": item_h / 2,
+        "shape": (
+            cq.Sketch()
+            .trapezoid(item_w, item_h, 90, mode="a")
+            .trapezoid(item_w - 2, item_h - 2, 90, mode="s")
+        ),
+        "height": 0.2,
+    },
+]
+
+
+def add(
+    *,
+    model,
+    width,
+    height,
+    thickness,
+    offset_x,
+    offset_y,
+    bottom_face,
+    back_face,
+    shell_t
+):
+    # Extrusions
+    if bottom_face:
+        for element in elements:
+            model = extrude_shape(
+                model=model,
+                face=bottom_face,
+                w=width,
+                h=height,
+                x_offset=offset_x,
+                y_offset=offset_y,
+                element=element,
+                height=-(element["height"] + shell_t),
+            )
+
+    # Holes
+    if back_face:
+        for hole in holes:
+            model = punch_hole(
+                model=model,
+                face=back_face,
+                # FIXME: This is weird because it's the RIGHT side,
+                # So it's height instead of w, offset_y instead of x
+                # need to work on making these coherent
+                w=height,
+                h=thickness,
+                x_offset=height - offset_y,
+                y_offset=shell_t,
+                hole=hole,
+                depth=shell_t,
+            )
+
+    return model

notebook_nueva/battery_holder.py

@@ -1,11 +1,14 @@
 import cadquery as cq
 
-stand_positions = [(0, 0), (58, 0), (58, 49), (0, 49)]
+from utils import extrude_shape, punch_hole, hex_vents
+
+stand_positions = [(3.5, 3.5), (61.5, 3.5), (61.5, 52.5), (3.5, 52.5)]
 stands = (
     cq.Sketch().push(stand_positions).circle(3, mode="a").circle(2.65 / 2, mode="s")
 )
 pillar_height = 7
-
+width = 85
+height = 56
 
 # This is a holder for DuPont cables so they connect to this
 # things' pogo pins which are used to power the CPU
@@ -39,16 +42,38 @@ elements = [
         "shape": stands,
         "height": pillar_height,
     },
-    # Pogo pin connector channels
     {
         "x": 0,
-        "y": 40,
+        "y": 0,
+        "shape": cq.Sketch().push(stand_positions).circle(5),
+        "height": 0,
+    },
+    # Pogo pin connector channels
+    {
+        "x": 3.5,
+        "y": 43.5,
         "shape": pin_holder,
         "height": 3,
     },
+    # Perimeter
+    {
+        "x": width / 2,
+        "y": height / 2,
+        "shape": (
+            cq.Sketch()
+            .trapezoid(width, height, 90, mode="a")
+            .trapezoid(width - 2, height - 2, 90, mode="s")
+            .vertices()
+            .fillet(3)
+        ),
+        "height": 0.2,
+    },
 ]
 
 
+vents = hex_vents(size=3, width=width, height=height)
+
+
 # Hole distances are relative to the rightmost pillar
 # seen from the back of the case, that's why they are negative
 # Heights are relative to base of pillars
@@ -56,18 +81,70 @@ elements = [
 holes = [
     # Power inlet
     {
-        "x": -15,
+        "x": -17,
         "y": -1 + pillar_height,
-        "height": 6.5,
-        "width": 12,
-        "fillet": 1,
+        "shape": cq.Sketch().trapezoid(12, 6.5, 90, mode="a").vertices().fillet(1),
     },
     # Power button
     {
-        "x": -67,
+        "x": -70,
         "y": 5.5 + pillar_height,
-        "height": 7,
-        "width": 7,
-        "fillet": 1,
+        "shape": cq.Sketch().trapezoid(7, 7, 90, mode="a").vertices().fillet(1),
     },
 ]
+
+
+def add(
+    *,
+    model,
+    width,
+    height,
+    thickness,
+    offset_x,
+    offset_y,
+    bottom_face,
+    back_face,
+    shell_t
+):
+    if bottom_face:
+        # Vents
+        for vent in vents:
+            model = punch_hole(
+                model=model,
+                face=bottom_face,
+                w=width,
+                h=height,
+                x_offset=offset_x + vent["x"],
+                y_offset=shell_t + offset_y + vent["y"],
+                hole=vent,
+                depth=shell_t,
+            )
+
+        # Battery holder stands and pogo pin holder
+        for element in elements:
+            model = extrude_shape(
+                model=model,
+                face=bottom_face,
+                w=width,
+                h=height,
+                x_offset=offset_x,
+                y_offset=shell_t + offset_y,
+                element=element,
+                height=-(element["height"] + shell_t),
+            )
+
+    if back_face:
+        # Holes
+        for hole in holes:
+            model = punch_hole(
+                model=model,
+                face=back_face,
+                w=width,
+                h=thickness,
+                x_offset=width - offset_x,
+                y_offset=shell_t,
+                hole=hole,
+                depth=shell_t,
+            )
+
+    return model

notebook_nueva/hdmi_out.py

@@ -0,0 +1,46 @@
+# Hole to expose a USB audio card (YMMV)
+
+import cadquery as cq
+
+from utils import punch_hole
+
+# The hole is for a random USB sound card.
+# Consumers should set proper offsets for the hole
+
+holes = [
+    # Hole for HDMI female adapter
+    {
+        "x": 0,
+        "y": 7,
+        "shape": cq.Sketch().trapezoid(22, 12.5, 90, mode="a").vertices().fillet(2),
+    },
+]
+
+
+def add(
+    *,
+    model,
+    width,
+    height,
+    thickness,
+    offset_x,
+    offset_y,
+    bottom_face,
+    back_face,
+    shell_t
+):
+    # Holes
+    if back_face:
+        for hole in holes:
+            model = punch_hole(
+                model=model,
+                face=back_face,
+                w=width,
+                h=thickness,
+                x_offset=width - offset_x,
+                y_offset=shell_t,
+                hole=hole,
+                depth=shell_t,
+            )
+
+    return model

notebook_nueva/hinged_lid.py

@@ -0,0 +1,226 @@
+import cadquery as cq
+from cadquery import exporters
+
+from modelo import (
+    height,
+    mounting_pillar_positions,
+    ti_depth,
+    ti_radius,
+    width,
+    thickness as model_thickness,
+    shell_t,
+)
+
+import keyboard
+import screen_mount
+
+hinge_radius = 6
+screw_radius = 1.5  # M3
+ring_radius = 5  # M3
+hinge_offset = max(p[1] for p in mounting_pillar_positions) + 6
+hinge_width = 25
+thickness = 50
+
+distance_to_kbd_top = hinge_radius + 15  # measure
+
+
+def model():
+    # Create a 2-part hinged lid
+
+    model = (
+        cq.Workplane("XY")
+        # Hollow box
+        .workplane(offset=-thickness / 2)
+        .box(width, height, thickness)
+        .faces("<Z")
+        .shell(-shell_t)
+        # Outer surface of the hinge
+        .faces(">X")
+        .workplane(centerOption="CenterOfBoundBox")
+        .center(height / 2 - hinge_offset, thickness / 2 - hinge_radius)
+        .tag("rightSide")
+        .placeSketch(cq.Sketch().circle(hinge_radius))
+        .extrude(-width)
+        # Cut middle section between the hinges
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-hinge_width)
+        .placeSketch(
+            cq.Sketch().polygon(
+                [
+                    (-hinge_radius, -hinge_radius),
+                    (-hinge_radius, 0),
+                    (-hinge_radius - shell_t, hinge_radius),
+                    (-shell_t, hinge_radius),
+                    (-shell_t, hinge_radius - shell_t),
+                    (hinge_radius, hinge_radius - shell_t),
+                    (hinge_radius, -hinge_radius),
+                    (-hinge_radius, -hinge_radius),
+                ]
+            )
+        )
+        .cutBlind(-width + 2 * hinge_width - 1)
+        # Hole for screws
+        .workplaneFromTagged("rightSide")
+        .placeSketch(cq.Sketch().circle(screw_radius))
+        .cutBlind(-width)
+        # Holes for rings & screw heads
+        .workplaneFromTagged("rightSide")
+        .placeSketch(cq.Sketch().circle(ring_radius))
+        .cutBlind(-5)
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-width + 4)
+        .placeSketch(cq.Sketch().circle(ring_radius))
+        .cutBlind(-5)
+        # Split hinge halves
+        .faces(">X")
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-hinge_width / 2)
+        .placeSketch(cq.Sketch().trapezoid(hinge_radius * 2 + 1, hinge_radius * 2, 90))
+        .cutBlind(-1)
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-hinge_width)
+        .placeSketch(cq.Sketch().trapezoid(hinge_radius * 2 + 1, hinge_radius * 2, 90))
+        .cutBlind(-1)
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-width + hinge_width / 2)
+        .placeSketch(cq.Sketch().trapezoid(hinge_radius * 2 + 1, hinge_radius * 2, 90))
+        .cutBlind(-1)
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-width + hinge_width)
+        .placeSketch(cq.Sketch().trapezoid(hinge_radius * 2 + 1, hinge_radius * 2, 90))
+        .cutBlind(-1)
+        # Threaded inserts
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-hinge_width / 2)
+        .placeSketch(cq.Sketch().circle(ti_radius))
+        .cutBlind(-ti_depth)
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-width + hinge_width / 2)
+        .placeSketch(cq.Sketch().circle(ti_radius))
+        .cutBlind(ti_depth)
+        # Split two halves
+        # First cut for the right hinge
+        .workplaneFromTagged("rightSide")
+        .placeSketch(
+            cq.Sketch()
+            .polygon(
+                [
+                    (0, 0),
+                    (-hinge_radius - 0.2, 0),
+                    (-hinge_radius - shell_t, hinge_radius),
+                    (0, hinge_radius),
+                    (0, 0),
+                ]
+            )
+            .polygon(
+                [
+                    (-hinge_radius - 0.2, 0),
+                    (-hinge_radius - 0.2, -1000),
+                    (-hinge_radius, -1000),
+                    (-hinge_radius, 0),
+                    (-hinge_radius - 0.2, 0),
+                ]
+            )
+            .circle(hinge_radius, mode="s")
+        )
+        .cutBlind(-hinge_width / 2 - 1)
+        # Second cut for the right hinge
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-hinge_width / 2)
+        .placeSketch(
+            cq.Sketch()
+            .polygon(
+                [
+                    (0, 0),
+                    (hinge_radius + 0.2, 0),
+                    (hinge_radius + 0.2 + shell_t, hinge_radius),
+                    (0, hinge_radius),
+                    (0, 0),
+                ]
+            )
+            .circle(hinge_radius, mode="s")
+        )
+        .cutBlind(-hinge_width / 2 - 1)
+        # First cut for the left hinge
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-width + hinge_width)
+        .placeSketch(
+            cq.Sketch()
+            .polygon(
+                [
+                    (0, 0),
+                    (hinge_radius + 0.2, 0),
+                    (hinge_radius + 0.2 + shell_t, hinge_radius),
+                    (0, hinge_radius),
+                    (0, 0),
+                ]
+            )
+            .circle(hinge_radius, mode="s")
+        )
+        .cutBlind(-hinge_width / 2 - 1)
+        # Second cut for the left hinge
+        .workplaneFromTagged("rightSide")
+        .workplane(offset=-width + hinge_width / 2)
+        .placeSketch(
+            cq.Sketch()
+            .polygon(
+                [
+                    (0, 0),
+                    (-hinge_radius - 0.2, 0),
+                    (-hinge_radius - shell_t, hinge_radius),
+                    (0, hinge_radius),
+                    (0, 0),
+                ]
+            )
+            .polygon(
+                [
+                    (-hinge_radius - 0.2, 0),
+                    (-hinge_radius - 0.2, -1000),
+                    (-hinge_radius, -1000),
+                    (-hinge_radius, 0),
+                    (-hinge_radius - 0.2, 0),
+                ]
+            )
+            .circle(hinge_radius, mode="s")
+        )
+        .cutBlind(-hinge_width / 2 - 1)
+    )
+
+    # Cut off shape of the base
+
+    model = (
+        model.workplaneFromTagged("rightSide")
+        .center(-height + hinge_offset, -thickness + hinge_radius)
+        .placeSketch(
+            cq.Sketch().polygon(
+                [
+                    (0, 0),
+                    (0, keyboard.front_thickness),
+                    (shell_t, keyboard.front_thickness),
+                    (keyboard.actual_height + shell_t, keyboard.back_thickness),
+                    (keyboard.actual_height + shell_t, model_thickness),
+                    (height, model_thickness),
+                    (height, 0),
+                    (0, 0),
+                ]
+            )
+        )
+        .cutBlind(-1000)
+    )
+
+    return model
+
+
+if __name__ == "__main__":
+    model = model()
+
+    exporters.export(model, "hinged_lid.stl")
+
+    exporters.export(
+        model,
+        "hinged_lid.svg",
+        opt={
+            "projectionDir": (0, 0, 1),
+            "strokeWidth": 0.3,
+        },
+    )

notebook_nueva/hinged_lid.svg

@@ -0,0 +1,198 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   width="800.0"
+   height="240.0"
+
+>
+    <g transform="scale(1.1320754716981134, -1.1320754716981134)   translate(332.1666667666666,-97.16666666666666)" stroke-width="0.3"  fill="none">
+       <!-- hidden lines -->
+       <g  stroke="rgb(160,160,160)" fill="none" stroke-dasharray="0.3,0.3" >
+			<path d="M155.5,19.5 L155.5,79.5 " />
+			<path d="M155.5,19.5 L155.5,19.3 " />
+			<path d="M155.5,18.74310998702215 L155.5,19.3 " />
+			<path d="M155.5,-76.5 L155.5,18.74310998702215 " />
+			<path d="M155.5,-79.5 L155.5,-76.5 " />
+			<path d="M155.5,30.5 L155.5,30.374639560909117 L155.5,30.004844339512097 L155.5,29.40915741234015 L155.5,28.61744900929367 L155.5,27.66941869558779 L155.5,26.61260466978157 L155.5,25.5 L155.5,24.38739533021843 L155.5,23.33058130441221 L155.5,22.38255099070633 L155.5,21.59084258765985 L155.5,20.995155660487903 L155.5,20.625360439090883 L155.5,20.500000000000004 " />
+			<path d="M155.5,20.5 L155.5,20.625360439090883 L155.5,20.995155660487903 L155.5,21.59084258765985 L155.5,22.38255099070633 L155.5,23.33058130441221 L155.5,24.38739533021843 L155.5,25.5 L155.5,26.61260466978157 L155.5,27.66941869558779 L155.5,28.617449009293665 L155.5,29.40915741234015 L155.5,30.004844339512097 L155.5,30.374639560909117 L155.5,30.499999999999996 " />
+			<path d="M142.0,17.900000000000002 L142.0,16.5 " />
+			<path d="M143.0,19.5 L143.0,19.650432526909057 L143.0,20.094186792585486 L143.0,20.80901110519182 L143.0,21.7590611888476 L143.0,22.89669756529465 L143.0,24.164874396262114 L143.0,25.5 L143.0,26.835125603737886 L143.0,28.10330243470535 L143.0,29.2409388111524 L143.0,30.19098889480818 L143.0,30.905813207414514 L143.0,31.349567473090943 L143.0,31.499999999999993 " />
+			<path d="M143.0,31.5 L143.0,31.495804228730393 L143.0,31.48322278308708 L143.0,31.462273259359456 L143.0,31.432984957350772 L143.0,31.395398839399732 L143.0,31.349567473090943 L143.0,31.295554957734414 L143.0,31.233436834716848 L143.0,31.16329998185021 L143.0,31.08524249186523 L143.0,30.999373535219867 L143.0,30.905813207414525 L143.0,30.80469236102767 L143.0,30.696152422706657 " />
+			<path d="M143.0,30.696152422706632 L152.5,30.696152422706632 " />
+			<path d="M152.5,19.5 L152.5,19.65043252690906 L152.5,20.09418679258549 L152.5,20.80901110519183 L152.5,21.759061188847607 L152.5,22.896697565294662 L152.5,24.164874396262125 L152.5,25.50000000000001 L152.5,26.835125603737897 L152.5,28.103302434705355 L152.5,29.240938811152407 L152.5,30.190988894808186 L152.5,30.905813207414518 L152.5,31.349567473090943 L152.5,31.499999999999996 " />
+			<path d="M152.5,31.5 L152.5,31.495804228730393 L152.5,31.48322278308708 L152.5,31.462273259359456 L152.5,31.432984957350772 L152.5,31.395398839399732 L152.5,31.349567473090943 L152.5,31.29555495773441 L152.5,31.233436834716848 L152.5,31.16329998185021 L152.5,31.08524249186523 L152.5,30.999373535219863 L152.5,30.90581320741452 L152.5,30.804692361027666 L152.5,30.696152422706657 " />
+			<path d="M155.5,79.5 L-155.5,79.5 " />
+			<path d="M-155.5,19.5 L-155.5,79.5 " />
+			<path d="M-152.5,19.5 L-155.5,19.5 " />
+			<path d="M-152.5,19.5 L-152.5,76.5 " />
+			<path d="M152.5,76.5 L-152.5,76.5 " />
+			<path d="M152.5,19.5 L152.5,76.5 " />
+			<path d="M155.5,19.5 L152.5,19.5 " />
+			<path d="M155.5,19.5 L152.5,19.5 " />
+			<path d="M155.5,19.3 L152.5,19.3 " />
+			<path d="M152.5,19.3 L155.5,19.3 " />
+			<path d="M152.5,18.74310998702215 L152.5,19.299999999999997 " />
+			<path d="M155.5,18.74310998702215 L152.5,18.74310998702215 " />
+			<path d="M155.5,18.74310998702215 L152.5,18.74310998702215 " />
+			<path d="M152.5,-76.5 L152.5,18.743109987022166 " />
+			<path d="M155.5,-76.5 L152.5,-76.5 " />
+			<path d="M152.5,-76.5 L-152.5,-76.5 " />
+			<path d="M-152.5,-76.5 L-155.5,-76.5 " />
+			<path d="M-155.5,-79.5 L-155.5,-76.5 " />
+			<path d="M155.5,-79.5 L-155.5,-79.5 " />
+			<path d="M155.5,30.5 L150.5,30.5 " />
+			<path d="M150.5,30.5 L150.5,30.374639560909117 L150.5,30.004844339512097 L150.5,29.40915741234015 L150.5,28.61744900929367 L150.5,27.66941869558779 L150.5,26.61260466978157 L150.5,25.5 L150.5,24.38739533021843 L150.5,23.33058130441221 L150.5,22.38255099070633 L150.5,21.59084258765985 L150.5,20.995155660487903 L150.5,20.625360439090883 L150.5,20.500000000000004 " />
+			<path d="M150.5,20.5 L150.5,20.625360439090883 L150.5,20.995155660487903 L150.5,21.59084258765985 L150.5,22.38255099070633 L150.5,23.33058130441221 L150.5,24.38739533021843 L150.5,25.5 L150.5,26.61260466978157 L150.5,27.66941869558779 L150.5,28.617449009293665 L150.5,29.40915741234015 L150.5,30.004844339512097 L150.5,30.374639560909117 L150.5,30.499999999999996 " />
+			<path d="M142.0,17.900000000000002 L142.0,20.303847577293368 " />
+			<path d="M142.0,31.5 L142.0,31.349567473090943 L142.0,30.905813207414518 L142.0,30.19098889480818 L142.0,29.240938811152404 L142.0,28.103302434705352 L142.0,26.83512560373789 L142.0,25.500000000000004 L142.0,24.164874396262118 L142.0,22.896697565294655 L142.0,21.759061188847603 L142.0,20.80901110519182 L142.0,20.094186792585486 L142.0,19.650432526909057 L142.0,19.500000000000007 " />
+			<path d="M142.0,19.5 L142.0,19.504195771269607 L142.0,19.51677721691292 L142.0,19.537726740640544 L142.0,19.567015042649228 L142.0,19.604601160600268 L142.0,19.650432526909057 L142.0,19.704445042265586 L142.0,19.766563165283152 L142.0,19.83670001814979 L142.0,19.91475750813477 L142.0,20.000626464780133 L142.0,20.094186792585475 L142.0,20.19530763897233 L142.0,20.303847577293343 " />
+			<path d="M142.0,27.85 L142.0,27.791080593627285 L142.0,27.617276839570685 L142.0,27.33730398379987 L142.0,26.965201034368025 L142.0,26.519626786926263 L142.0,26.02292419479734 L142.0,25.5 L142.0,24.977075805202663 L142.0,24.48037321307374 L142.0,24.034798965631975 L142.0,23.66269601620013 L142.0,23.382723160429315 L142.0,23.208919406372715 L142.0,23.15 " />
+			<path d="M142.0,23.15 L142.0,23.208919406372715 L142.0,23.382723160429315 L142.0,23.66269601620013 L142.0,24.034798965631975 L142.0,24.480373213073737 L142.0,24.97707580520266 L142.0,25.5 L142.0,26.022924194797337 L142.0,26.51962678692626 L142.0,26.96520103436802 L142.0,27.33730398379987 L142.0,27.617276839570685 L142.0,27.791080593627285 L142.0,27.849999999999998 " />
+			<path d="M-152.5,17.900000000000006 L-152.5,-76.5 " />
+			<path d="M-152.5,-76.5 L152.5,-76.5 " />
+			<path d="M152.5,17.900000000000006 L152.5,-76.5 " />
+			<path d="M130.5,20.303847577293368 L142.0,20.303847577293368 " />
+			<path d="M130.5,20.303847577293368 L130.5,18.0 " />
+			<path d="M-131.5,18.0 L-131.5,20.303847577293368 " />
+			<path d="M-143.0,20.303847577293368 L-131.5,20.303847577293368 " />
+			<path d="M-143.0,20.303847577293368 L-143.0,17.900000000000002 " />
+			<path d="M143.0,33.199999999999996 L143.0,30.696152422706632 " />
+			<path d="M143.0,33.199999999999996 L143.0,34.699999999999996 " />
+			<path d="M143.0,27.0 L143.0,26.962391868272736 L143.0,26.851453301853628 L143.0,26.672747223702046 L143.0,26.4352347027881 L143.0,26.15082560867634 L143.0,25.833781400934473 L143.0,25.5 L143.0,25.16621859906553 L143.0,24.849174391323665 L143.0,24.5647652972119 L143.0,24.327252776297954 L143.0,24.148546698146372 L143.0,24.037608131727264 L143.0,24.0 " />
+			<path d="M143.0,24.0 L143.0,24.037608131727264 L143.0,24.148546698146372 L143.0,24.327252776297954 L143.0,24.5647652972119 L143.0,24.84917439132366 L143.0,25.166218599065527 L143.0,25.5 L143.0,25.83378140093447 L143.0,26.150825608676335 L143.0,26.4352347027881 L143.0,26.672747223702046 L143.0,26.851453301853628 L143.0,26.962391868272736 L143.0,27.0 " />
+			<path d="M-152.5,76.5 L152.5,76.5 " />
+			<path d="M-152.5,76.5 L-152.5,30.696152422706632 " />
+			<path d="M-152.5,30.696152422706632 L-144.0,30.696152422706632 " />
+			<path d="M-144.0,30.696152422706632 L-144.0,33.199999999999996 " />
+			<path d="M-130.5,33.199999999999996 L-130.5,22.5 " />
+			<path d="M129.5,22.5 L-130.5,22.5 " />
+			<path d="M129.5,22.5 L129.5,33.199999999999996 " />
+			<path d="M152.5,76.5 L152.5,30.696152422706632 " />
+			<path d="M-155.5,30.5 L-155.5,30.374639560909117 L-155.5,30.004844339512097 L-155.5,29.40915741234015 L-155.5,28.61744900929367 L-155.5,27.66941869558779 L-155.5,26.61260466978157 L-155.5,25.5 L-155.5,24.38739533021843 L-155.5,23.33058130441221 L-155.5,22.38255099070633 L-155.5,21.59084258765985 L-155.5,20.995155660487903 L-155.5,20.625360439090883 L-155.5,20.500000000000004 " />
+			<path d="M-155.5,20.5 L-155.5,20.625360439090883 L-155.5,20.995155660487903 L-155.5,21.59084258765985 L-155.5,22.38255099070633 L-155.5,23.33058130441221 L-155.5,24.38739533021843 L-155.5,25.5 L-155.5,26.61260466978157 L-155.5,27.66941869558779 L-155.5,28.617449009293665 L-155.5,29.40915741234015 L-155.5,30.004844339512097 L-155.5,30.374639560909117 L-155.5,30.499999999999996 " />
+			<path d="M129.5,33.199999999999996 L129.5,34.699999999999996 " />
+			<path d="M-130.5,33.199999999999996 L-130.5,34.699999999999996 " />
+			<path d="M-144.0,33.199999999999996 L-144.0,34.699999999999996 " />
+			<path d="M-144.0,19.5 L-144.0,19.650432526909057 L-144.0,20.094186792585486 L-144.0,20.80901110519182 L-144.0,21.7590611888476 L-144.0,22.89669756529465 L-144.0,24.164874396262114 L-144.0,25.5 L-144.0,26.835125603737886 L-144.0,28.10330243470535 L-144.0,29.2409388111524 L-144.0,30.19098889480818 L-144.0,30.905813207414514 L-144.0,31.349567473090943 L-144.0,31.499999999999993 " />
+			<path d="M-144.0,31.5 L-144.0,31.495804228730393 L-144.0,31.48322278308708 L-144.0,31.462273259359456 L-144.0,31.432984957350772 L-144.0,31.395398839399732 L-144.0,31.349567473090943 L-144.0,31.295554957734414 L-144.0,31.233436834716848 L-144.0,31.16329998185021 L-144.0,31.08524249186523 L-144.0,30.999373535219867 L-144.0,30.905813207414525 L-144.0,30.80469236102767 L-144.0,30.696152422706657 " />
+			<path d="M-144.0,27.0 L-144.0,26.962391868272736 L-144.0,26.851453301853628 L-144.0,26.672747223702046 L-144.0,26.4352347027881 L-144.0,26.15082560867634 L-144.0,25.833781400934473 L-144.0,25.5 L-144.0,25.16621859906553 L-144.0,24.849174391323665 L-144.0,24.5647652972119 L-144.0,24.327252776297954 L-144.0,24.148546698146372 L-144.0,24.037608131727264 L-144.0,24.0 " />
+			<path d="M-144.0,24.0 L-144.0,24.037608131727264 L-144.0,24.148546698146372 L-144.0,24.327252776297954 L-144.0,24.5647652972119 L-144.0,24.84917439132366 L-144.0,25.166218599065527 L-144.0,25.5 L-144.0,25.83378140093447 L-144.0,26.150825608676335 L-144.0,26.4352347027881 L-144.0,26.672747223702046 L-144.0,26.851453301853628 L-144.0,26.962391868272736 L-144.0,27.0 " />
+			<path d="M-152.5,30.696152422706632 L-152.5,30.80469236102766 L-152.5,30.905813207414514 L-152.5,30.99937353521986 L-152.5,31.085242491865227 L-152.5,31.163299981850205 L-152.5,31.233436834716844 L-152.5,31.29555495773441 L-152.5,31.349567473090943 L-152.5,31.39539883939973 L-152.5,31.432984957350772 L-152.5,31.462273259359456 L-152.5,31.48322278308708 L-152.5,31.495804228730393 L-152.5,31.5 " />
+			<path d="M-152.5,31.5 L-152.5,31.349567473090943 L-152.5,30.905813207414518 L-152.5,30.19098889480818 L-152.5,29.240938811152404 L-152.5,28.103302434705352 L-152.5,26.835125603737893 L-152.5,25.500000000000007 L-152.5,24.16487439626212 L-152.5,22.89669756529466 L-152.5,21.759061188847603 L-152.5,20.809011105191825 L-152.5,20.09418679258549 L-152.5,19.650432526909057 L-152.5,19.500000000000004 " />
+			<path d="M-152.50000000000003,-76.5 L-152.50000000000003,18.743109987022166 " />
+			<path d="M-152.5,18.74310998702215 L-155.5,18.74310998702215 " />
+			<path d="M-155.50000000000003,-76.5 L-155.50000000000003,18.743109987022166 " />
+			<path d="M-155.5,18.74310998702215 L-155.5,19.299999999999997 " />
+			<path d="M130.5,31.5 L130.5,31.349567473090943 L130.5,30.905813207414518 L130.5,30.19098889480818 L130.5,29.240938811152404 L130.5,28.103302434705352 L130.5,26.83512560373789 L130.5,25.500000000000004 L130.5,24.164874396262118 L130.5,22.896697565294655 L130.5,21.759061188847603 L130.5,20.80901110519182 L130.5,20.094186792585486 L130.5,19.650432526909057 L130.5,19.500000000000007 " />
+			<path d="M130.5,19.5 L130.5,19.504195771269607 L130.5,19.51677721691292 L130.5,19.537726740640544 L130.5,19.567015042649228 L130.5,19.604601160600268 L130.5,19.650432526909057 L130.5,19.704445042265586 L130.5,19.766563165283152 L130.5,19.83670001814979 L130.5,19.91475750813477 L130.5,20.000626464780133 L130.5,20.094186792585475 L130.5,20.19530763897233 L130.5,20.303847577293343 " />
+			<path d="M130.5,18.0 L130.5,16.5 " />
+			<path d="M130.5,27.0 L130.5,26.962391868272736 L130.5,26.851453301853628 L130.5,26.672747223702046 L130.5,26.4352347027881 L130.5,26.15082560867634 L130.5,25.833781400934473 L130.5,25.5 L130.5,25.16621859906553 L130.5,24.849174391323665 L130.5,24.5647652972119 L130.5,24.327252776297954 L130.5,24.148546698146372 L130.5,24.037608131727264 L130.5,24.0 " />
+			<path d="M130.5,24.0 L130.5,24.037608131727264 L130.5,24.148546698146372 L130.5,24.327252776297954 L130.5,24.5647652972119 L130.5,24.84917439132366 L130.5,25.166218599065527 L130.5,25.5 L130.5,25.83378140093447 L130.5,26.150825608676335 L130.5,26.4352347027881 L130.5,26.672747223702046 L130.5,26.851453301853628 L130.5,26.962391868272736 L130.5,27.0 " />
+			<path d="M-131.5,18.0 L-131.5,16.5 " />
+			<path d="M-131.5,31.5 L-131.5,31.349567473090943 L-131.5,30.905813207414518 L-131.5,30.19098889480818 L-131.5,29.240938811152404 L-131.5,28.103302434705352 L-131.5,26.83512560373789 L-131.5,25.500000000000004 L-131.5,24.164874396262118 L-131.5,22.896697565294655 L-131.5,21.759061188847603 L-131.5,20.80901110519182 L-131.5,20.094186792585486 L-131.5,19.650432526909057 L-131.5,19.500000000000007 " />
+			<path d="M-131.5,19.5 L-131.5,19.504195771269607 L-131.5,19.51677721691292 L-131.5,19.537726740640544 L-131.5,19.567015042649228 L-131.5,19.604601160600268 L-131.5,19.650432526909057 L-131.5,19.704445042265586 L-131.5,19.766563165283152 L-131.5,19.83670001814979 L-131.5,19.91475750813477 L-131.5,20.000626464780133 L-131.5,20.094186792585475 L-131.5,20.19530763897233 L-131.5,20.303847577293343 " />
+			<path d="M-131.5,27.0 L-131.5,26.962391868272736 L-131.5,26.851453301853628 L-131.5,26.672747223702046 L-131.5,26.4352347027881 L-131.5,26.15082560867634 L-131.5,25.833781400934473 L-131.5,25.5 L-131.5,25.16621859906553 L-131.5,24.849174391323665 L-131.5,24.5647652972119 L-131.5,24.327252776297954 L-131.5,24.148546698146372 L-131.5,24.037608131727264 L-131.5,24.0 " />
+			<path d="M-131.5,24.0 L-131.5,24.037608131727264 L-131.5,24.148546698146372 L-131.5,24.327252776297954 L-131.5,24.5647652972119 L-131.5,24.84917439132366 L-131.5,25.166218599065527 L-131.5,25.5 L-131.5,25.83378140093447 L-131.5,26.150825608676335 L-131.5,26.4352347027881 L-131.5,26.672747223702046 L-131.5,26.851453301853628 L-131.5,26.962391868272736 L-131.5,27.0 " />
+			<path d="M-143.0,31.5 L-143.0,31.349567473090943 L-143.0,30.905813207414518 L-143.0,30.19098889480818 L-143.0,29.240938811152404 L-143.0,28.103302434705352 L-143.0,26.83512560373789 L-143.0,25.500000000000004 L-143.0,24.164874396262118 L-143.0,22.896697565294655 L-143.0,21.759061188847603 L-143.0,20.80901110519182 L-143.0,20.094186792585486 L-143.0,19.650432526909057 L-143.0,19.500000000000007 " />
+			<path d="M-143.0,19.5 L-143.0,19.504195771269607 L-143.0,19.51677721691292 L-143.0,19.537726740640544 L-143.0,19.567015042649228 L-143.0,19.604601160600268 L-143.0,19.650432526909057 L-143.0,19.704445042265586 L-143.0,19.766563165283152 L-143.0,19.83670001814979 L-143.0,19.91475750813477 L-143.0,20.000626464780133 L-143.0,20.094186792585475 L-143.0,20.19530763897233 L-143.0,20.303847577293343 " />
+			<path d="M-143.0,17.900000000000002 L-143.0,16.5 " />
+			<path d="M-143.0,27.85 L-143.0,27.791080593627285 L-143.0,27.617276839570685 L-143.0,27.33730398379987 L-143.0,26.965201034368025 L-143.0,26.519626786926263 L-143.0,26.02292419479734 L-143.0,25.5 L-143.0,24.977075805202663 L-143.0,24.48037321307374 L-143.0,24.034798965631975 L-143.0,23.66269601620013 L-143.0,23.382723160429315 L-143.0,23.208919406372715 L-143.0,23.15 " />
+			<path d="M-143.0,23.15 L-143.0,23.208919406372715 L-143.0,23.382723160429315 L-143.0,23.66269601620013 L-143.0,24.034798965631975 L-143.0,24.480373213073737 L-143.0,24.97707580520266 L-143.0,25.5 L-143.0,26.022924194797337 L-143.0,26.51962678692626 L-143.0,26.96520103436802 L-143.0,27.33730398379987 L-143.0,27.617276839570685 L-143.0,27.791080593627285 L-143.0,27.849999999999998 " />
+			<path d="M150.5,27.0 L150.5,26.962391868272736 L150.5,26.851453301853628 L150.5,26.672747223702046 L150.5,26.4352347027881 L150.5,26.15082560867634 L150.5,25.833781400934473 L150.5,25.5 L150.5,25.16621859906553 L150.5,24.849174391323665 L150.5,24.5647652972119 L150.5,24.327252776297954 L150.5,24.148546698146372 L150.5,24.037608131727264 L150.5,24.0 " />
+			<path d="M150.5,24.0 L150.5,24.037608131727264 L150.5,24.148546698146372 L150.5,24.327252776297954 L150.5,24.5647652972119 L150.5,24.84917439132366 L150.5,25.166218599065527 L150.5,25.5 L150.5,25.83378140093447 L150.5,26.150825608676335 L150.5,26.4352347027881 L150.5,26.672747223702046 L150.5,26.851453301853628 L150.5,26.962391868272736 L150.5,27.0 " />
+			<path d="M142.0,27.85 L136.75,27.85 " />
+			<path d="M136.75,27.85 L136.75,27.791080593627285 L136.75,27.617276839570685 L136.75,27.33730398379987 L136.75,26.965201034368025 L136.75,26.519626786926263 L136.75,26.02292419479734 L136.75,25.5 L136.75,24.977075805202663 L136.75,24.48037321307374 L136.75,24.034798965631975 L136.75,23.66269601620013 L136.75,23.382723160429315 L136.75,23.208919406372715 L136.75,23.15 " />
+			<path d="M136.75,23.15 L136.75,23.208919406372715 L136.75,23.382723160429315 L136.75,23.66269601620013 L136.75,24.034798965631975 L136.75,24.480373213073737 L136.75,24.97707580520266 L136.75,25.5 L136.75,26.022924194797337 L136.75,26.51962678692626 L136.75,26.96520103436802 L136.75,27.33730398379987 L136.75,27.617276839570685 L136.75,27.791080593627285 L136.75,27.849999999999998 " />
+			<path d="M-152.5,18.74310998702215 L-152.5,19.299999999999997 " />
+			<path d="M150.5,27.0 L143.0,27.0 " />
+			<path d="M-151.5,30.5 L-151.5,30.374639560909117 L-151.5,30.004844339512097 L-151.5,29.40915741234015 L-151.5,28.61744900929367 L-151.5,27.66941869558779 L-151.5,26.61260466978157 L-151.5,25.5 L-151.5,24.38739533021843 L-151.5,23.33058130441221 L-151.5,22.38255099070633 L-151.5,21.59084258765985 L-151.5,20.995155660487903 L-151.5,20.625360439090883 L-151.5,20.500000000000004 " />
+			<path d="M-151.5,20.5 L-151.5,20.625360439090883 L-151.5,20.995155660487903 L-151.5,21.59084258765985 L-151.5,22.38255099070633 L-151.5,23.33058130441221 L-151.5,24.38739533021843 L-151.5,25.5 L-151.5,26.61260466978157 L-151.5,27.66941869558779 L-151.5,28.617449009293665 L-151.5,29.40915741234015 L-151.5,30.004844339512097 L-151.5,30.374639560909117 L-151.5,30.499999999999996 " />
+			<path d="M-151.5,30.5 L-155.5,30.5 " />
+			<path d="M-144.0,27.0 L-151.5,27.0 " />
+			<path d="M-151.5,27.0 L-151.5,26.962391868272736 L-151.5,26.851453301853628 L-151.5,26.672747223702046 L-151.5,26.4352347027881 L-151.5,26.15082560867634 L-151.5,25.833781400934473 L-151.5,25.5 L-151.5,25.16621859906553 L-151.5,24.849174391323665 L-151.5,24.5647652972119 L-151.5,24.327252776297954 L-151.5,24.148546698146372 L-151.5,24.037608131727264 L-151.5,24.0 " />
+			<path d="M-151.5,24.0 L-151.5,24.037608131727264 L-151.5,24.148546698146372 L-151.5,24.327252776297954 L-151.5,24.5647652972119 L-151.5,24.84917439132366 L-151.5,25.166218599065527 L-151.5,25.5 L-151.5,25.83378140093447 L-151.5,26.150825608676335 L-151.5,26.4352347027881 L-151.5,26.672747223702046 L-151.5,26.851453301853628 L-151.5,26.962391868272736 L-151.5,27.0 " />
+			<path d="M-152.5,18.74310998702215 L-155.5,18.74310998702215 " />
+			<path d="M-155.5,19.3 L-152.5,19.3 " />
+			<path d="M136.75,27.0 L136.75,26.962391868272736 L136.75,26.851453301853628 L136.75,26.672747223702046 L136.75,26.4352347027881 L136.75,26.15082560867634 L136.75,25.833781400934473 L136.75,25.5 L136.75,25.16621859906553 L136.75,24.849174391323665 L136.75,24.5647652972119 L136.75,24.327252776297954 L136.75,24.148546698146372 L136.75,24.037608131727264 L136.75,24.0 " />
+			<path d="M136.75,24.0 L136.75,24.037608131727264 L136.75,24.148546698146372 L136.75,24.327252776297954 L136.75,24.5647652972119 L136.75,24.84917439132366 L136.75,25.166218599065527 L136.75,25.5 L136.75,25.83378140093447 L136.75,26.150825608676335 L136.75,26.4352347027881 L136.75,26.672747223702046 L136.75,26.851453301853628 L136.75,26.962391868272736 L136.75,27.0 " />
+			<path d="M136.75,27.0 L130.5,27.0 " />
+			<path d="M-131.5,27.0 L-136.75,27.0 " />
+			<path d="M-136.75,27.0 L-136.75,26.962391868272736 L-136.75,26.851453301853628 L-136.75,26.672747223702046 L-136.75,26.4352347027881 L-136.75,26.15082560867634 L-136.75,25.833781400934473 L-136.75,25.5 L-136.75,25.16621859906553 L-136.75,24.849174391323665 L-136.75,24.5647652972119 L-136.75,24.327252776297954 L-136.75,24.148546698146372 L-136.75,24.037608131727264 L-136.75,24.0 " />
+			<path d="M-136.75,24.0 L-136.75,24.037608131727264 L-136.75,24.148546698146372 L-136.75,24.327252776297954 L-136.75,24.5647652972119 L-136.75,24.84917439132366 L-136.75,25.166218599065527 L-136.75,25.5 L-136.75,25.83378140093447 L-136.75,26.150825608676335 L-136.75,26.4352347027881 L-136.75,26.672747223702046 L-136.75,26.851453301853628 L-136.75,26.962391868272736 L-136.75,27.0 " />
+			<path d="M-143.0,27.85 L-136.75,27.85 " />
+			<path d="M-136.75,27.85 L-136.75,27.791080593627285 L-136.75,27.617276839570685 L-136.75,27.33730398379987 L-136.75,26.965201034368025 L-136.75,26.519626786926263 L-136.75,26.02292419479734 L-136.75,25.5 L-136.75,24.977075805202663 L-136.75,24.48037321307374 L-136.75,24.034798965631975 L-136.75,23.66269601620013 L-136.75,23.382723160429315 L-136.75,23.208919406372715 L-136.75,23.15 " />
+			<path d="M-136.75,23.15 L-136.75,23.208919406372715 L-136.75,23.382723160429315 L-136.75,23.66269601620013 L-136.75,24.034798965631975 L-136.75,24.480373213073737 L-136.75,24.97707580520266 L-136.75,25.5 L-136.75,26.022924194797337 L-136.75,26.51962678692626 L-136.75,26.96520103436802 L-136.75,27.33730398379987 L-136.75,27.617276839570685 L-136.75,27.791080593627285 L-136.75,27.849999999999998 " />
+			<path d="M143.0,31.5 L152.5,31.5 " />
+			<path d="M150.5,20.5 L155.5,20.5 " />
+			<path d="M-152.5,31.5 L-144.0,31.5 " />
+			<path d="M130.5,19.5 L142.0,19.5 " />
+			<path d="M-143.0,19.5 L-131.5,19.5 " />
+			<path d="M136.75,23.15 L142.0,23.15 " />
+			<path d="M143.0,24.0 L150.5,24.0 " />
+			<path d="M-155.5,20.5 L-151.5,20.5 " />
+			<path d="M-151.5,24.0 L-144.0,24.0 " />
+			<path d="M130.5,24.0 L136.75,24.0 " />
+			<path d="M-136.75,24.0 L-131.5,24.0 " />
+			<path d="M-136.75,23.15 L-143.0,23.15 " />
+
+       </g>
+
+       <!-- solid lines -->
+       <g  stroke="rgb(0,0,0)" fill="none">
+			<path d="M155.5,19.3 L155.5,16.5 " />
+			<path d="M155.5,19.5 L155.5,19.3 " />
+			<path d="M155.5,25.5 L155.5,24.828213143380154 L155.5,24.164874396262114 L155.5,23.518325628268997 L155.5,22.89669756529465 L155.5,22.30780754090798 L155.5,21.7590611888476 L155.5,21.257359312880716 L155.5,20.80901110519182 L155.5,20.419654804630294 L155.5,20.094186792585486 L155.5,19.836700018149795 L155.5,19.650432526909057 L155.5,19.537726740640544 L155.5,19.5 " />
+			<path d="M155.5,79.5 L155.5,25.5 " />
+			<path d="M155.5,16.5 L155.5,-79.5 " />
+			<path d="M155.5,16.5 L142.0,16.5 " />
+			<path d="M152.5,17.900000000000006 L142.0,17.900000000000006 " />
+			<path d="M152.5,19.299999999999997 L152.5,17.899999999999995 " />
+			<path d="M155.5,19.3 L152.5,19.3 " />
+			<path d="M152.5,19.5 L152.5,19.299999999999997 " />
+			<path d="M155.5,19.5 L152.5,19.5 " />
+			<path d="M155.5,25.5 L143.0,25.5 " />
+			<path d="M143.0,25.5 L143.0,24.828213143380154 L143.0,24.164874396262114 L143.0,23.518325628268997 L143.0,22.89669756529465 L143.0,22.30780754090798 L143.0,21.7590611888476 L143.0,21.257359312880716 L143.0,20.80901110519182 L143.0,20.419654804630294 L143.0,20.094186792585486 L143.0,19.836700018149795 L143.0,19.650432526909057 L143.0,19.537726740640544 L143.0,19.5 " />
+			<path d="M-155.5,79.5 L-155.5,25.5 " />
+			<path d="M-155.5,79.5 L155.5,79.5 " />
+			<path d="M143.0,34.7 L143.0,25.5 " />
+			<path d="M143.0,34.7 L129.5,34.7 " />
+			<path d="M129.5,22.5 L129.5,34.7 " />
+			<path d="M129.5,22.5 L-130.5,22.5 " />
+			<path d="M-130.5,34.7 L-130.5,22.5 " />
+			<path d="M-130.5,34.7 L-144.0,34.7 " />
+			<path d="M-144.0,25.5 L-144.0,34.7 " />
+			<path d="M-144.0,25.5 L-155.5,25.5 " />
+			<path d="M-155.5,-79.5 L155.5,-79.5 " />
+			<path d="M142.0,16.5 L142.0,25.5 " />
+			<path d="M142.0,25.5 L130.5,25.5 " />
+			<path d="M130.5,25.5 L130.5,16.5 " />
+			<path d="M130.5,16.5 L-131.5,16.5 " />
+			<path d="M-131.5,16.5 L-131.5,25.5 " />
+			<path d="M-131.5,25.5 L-143.0,25.5 " />
+			<path d="M-143.0,25.5 L-143.0,16.5 " />
+			<path d="M-143.0,16.5 L-155.5,16.5 " />
+			<path d="M-155.5,16.5 L-155.5,-79.5 " />
+			<path d="M142.0,25.5 L142.0,26.171786856619846 L142.0,26.835125603737886 L142.0,27.481674371731003 L142.0,28.10330243470535 L142.0,28.69219245909202 L142.0,29.2409388111524 L142.0,29.742640687119284 L142.0,30.19098889480818 L142.0,30.580345195369702 L142.0,30.905813207414514 L142.0,31.163299981850205 L142.0,31.349567473090943 L142.0,31.462273259359456 L142.0,31.5 " />
+			<path d="M-143.0,17.900000000000006 L-152.5,17.900000000000006 " />
+			<path d="M130.5,18.000000000000014 L-131.5,18.000000000000014 " />
+			<path d="M-130.5,33.2 L-144.0,33.2 " />
+			<path d="M143.0,33.2 L129.5,33.2 " />
+			<path d="M-155.5,25.5 L-155.5,24.828213143380154 L-155.5,24.164874396262114 L-155.5,23.518325628268997 L-155.5,22.89669756529465 L-155.5,22.30780754090798 L-155.5,21.7590611888476 L-155.5,21.257359312880716 L-155.5,20.80901110519182 L-155.5,20.419654804630294 L-155.5,20.094186792585486 L-155.5,19.836700018149795 L-155.5,19.650432526909057 L-155.5,19.537726740640544 L-155.5,19.5 " />
+			<path d="M-144.0,25.5 L-144.0,24.828213143380154 L-144.0,24.164874396262114 L-144.0,23.518325628268997 L-144.0,22.89669756529465 L-144.0,22.30780754090798 L-144.0,21.7590611888476 L-144.0,21.257359312880716 L-144.0,20.80901110519182 L-144.0,20.419654804630294 L-144.0,20.094186792585486 L-144.0,19.836700018149795 L-144.0,19.650432526909057 L-144.0,19.537726740640544 L-144.0,19.5 " />
+			<path d="M-152.5,19.5 L-155.5,19.5 " />
+			<path d="M-155.5,19.299999999999997 L-155.5,16.5 " />
+			<path d="M130.5,25.5 L130.5,26.171786856619846 L130.5,26.835125603737886 L130.5,27.481674371731003 L130.5,28.10330243470535 L130.5,28.69219245909202 L130.5,29.2409388111524 L130.5,29.742640687119284 L130.5,30.19098889480818 L130.5,30.580345195369702 L130.5,30.905813207414514 L130.5,31.163299981850205 L130.5,31.349567473090943 L130.5,31.462273259359456 L130.5,31.5 " />
+			<path d="M-131.5,25.5 L-131.5,26.171786856619846 L-131.5,26.835125603737886 L-131.5,27.481674371731003 L-131.5,28.10330243470535 L-131.5,28.69219245909202 L-131.5,29.2409388111524 L-131.5,29.742640687119284 L-131.5,30.19098889480818 L-131.5,30.580345195369702 L-131.5,30.905813207414514 L-131.5,31.163299981850205 L-131.5,31.349567473090943 L-131.5,31.462273259359456 L-131.5,31.5 " />
+			<path d="M-143.0,25.5 L-143.0,26.171786856619846 L-143.0,26.835125603737886 L-143.0,27.481674371731003 L-143.0,28.10330243470535 L-143.0,28.69219245909202 L-143.0,29.2409388111524 L-143.0,29.742640687119284 L-143.0,30.19098889480818 L-143.0,30.580345195369702 L-143.0,30.905813207414514 L-143.0,31.163299981850205 L-143.0,31.349567473090943 L-143.0,31.462273259359456 L-143.0,31.5 " />
+			<path d="M-152.5,19.299999999999997 L-152.5,17.899999999999995 " />
+			<path d="M-152.5,19.3 L-155.5,19.3 " />
+			<path d="M143.0,19.5 L152.5,19.5 " />
+			<path d="M-152.5,19.5 L-144.0,19.5 " />
+			<path d="M130.5,31.5 L142.0,31.5 " />
+			<path d="M-143.0,31.5 L-131.5,31.5 " />
+
+       </g>
+    </g>
+    
+</svg>

notebook_nueva/keyboard.py

@@ -0,0 +1,103 @@
+import cadquery as cq
+import math
+
+# Size of the kbd board
+kbd_height = 95.5
+kbd_width = 305
+back_thickness = 19
+front_thickness = 12
+
+# Pythagoras
+actual_height = (kbd_height**2 - (back_thickness - front_thickness) ** 2) ** 0.5
+kbd_angle = math.acos(actual_height / kbd_height) * 180 / math.pi
+
+kbd_pillar_positions = [
+    (19, 16),
+    (142.5, 25.5),
+    (kbd_width - 20, 16),
+    (23.5, 79.5),
+    (145.5, 82.5),
+    (kbd_width - 19, 79.5),
+]
+
+elements = [
+    # Shorter pillars
+    {
+        "x": 0,
+        "y": 0,
+        "z": 5.5,
+        "shape": cq.Sketch().push(kbd_pillar_positions).circle(5, mode="a"),
+    },
+    # Taller pillars with holes for self-tapping screws
+    {
+        "x": 0,
+        "y": 0,
+        "z": 2.5,
+        "shape": (
+            cq.Sketch()
+            .push(kbd_pillar_positions)
+            .circle(2.4, mode="a")
+            .circle(1.1, mode="s")
+        ),
+    },
+]
+
+
+def add(
+    *,
+    model,
+    width,
+    height,
+    thickness,
+    offset_x,
+    offset_y,
+    bottom_face,
+    back_face,
+    shell_t
+):
+    # This one is special, it creates angled things and cuts off the
+    # case, so ... it's going to do weird stuff
+
+    if bottom_face:
+        model = (
+            model.faces(bottom_face)
+            .workplane(centerOption="CenterOfBoundBox", offset=-front_thickness)
+            .center(
+                -width / 2,
+                height / 2,
+            )
+            .transformed(rotate=cq.Vector(kbd_angle, 0, 0))
+            .tag("kbd_sloped")
+        )
+        for element in elements:
+            model = (
+                model.workplaneFromTagged("kbd_sloped")
+                .center(offset_x + element["x"], -offset_y - element["y"])
+                .workplane(offset=element["z"])
+                .placeSketch(element["shape"])
+                .extrude(100)
+            )
+
+        model = (
+            model.workplaneFromTagged("mid_height")
+            .transformed(offset=cq.Vector(0, 0, -thickness / 2))
+            .split(keepTop=True)
+            .faces(">X")
+            .workplane(centerOption="CenterOfBoundBox")
+            .center(-height / 2, -thickness / 2)
+            .placeSketch(
+                cq.Sketch().polygon(
+                    [
+                        [0, front_thickness],
+                        [shell_t, front_thickness],
+                        [actual_height + shell_t, back_thickness],
+                        [actual_height + shell_t, 1000],
+                        [0, 1000],
+                        [0, front_thickness],
+                    ]
+                )
+            )
+            .cutBlind(-1000)
+        )
+
+    return model

notebook_nueva/lid.py

@@ -0,0 +1,109 @@
+import cadquery as cq
+from cadquery import exporters
+
+from modelo import mounting_pillar_positions, shell_t, width
+from utils import hex_vents, punch_hole, extrude_shape2
+
+# Dimensions for countersunk M4 screws
+m4_top = 9
+m4_bottom = 4
+
+
+lip_thickness = 1.5
+# Position of pillar + shell_t + pillar "radius" + lip
+height = max([y for _, y in mounting_pillar_positions]) + 6 + shell_t + lip_thickness
+thickness = shell_t
+front_lip = 8
+
+
+def model():
+    # Create the basic shape of the case lid
+    model = (
+        cq.Workplane("XY")
+        # Hollow box
+        .box(width, height, thickness)
+        .edges("|Z and >Y")
+        .fillet(2)
+    )
+
+    # Make many holes
+    vent = hex_vents(size=6, width=width * 0.9, height=height * 0.9)[0]
+    model = punch_hole(
+        model=model,
+        face=">Z",
+        w=width,
+        h=height,
+        x_offset=0.05 * width,
+        y_offset=0.05 * height,
+        hole=vent,
+        depth=thickness,
+    )
+
+    # Add screw holes
+    for position in mounting_pillar_positions:
+        model = (
+            model.faces(">Z")
+            .workplane(centerOption="CenterOfBoundBox")
+            .center(-width / 2 + position[0], height / 2 - position[1] - shell_t)
+            .placeSketch(cq.Sketch().circle(m4_top / 2 + 1.5))
+            .extrude(-thickness)
+            .faces(">Z")
+            .workplane(centerOption="CenterOfBoundBox")
+            .center(-width / 2 + position[0], height / 2 - position[1] - shell_t)
+            .cskHole(m4_bottom, m4_top, 82, depth=None)
+        )
+
+    # Add front lip
+
+    model = (
+        model.faces(">Z")
+        .workplane(centerOption="CenterOfBoundBox")
+        .center(0, -height / 2 + lip_thickness / 2)
+        .placeSketch(cq.Sketch().trapezoid(width - 2 * shell_t, lip_thickness, 90))
+        .extrude(-front_lip - thickness)
+    )
+
+    return model
+
+
+def decorative_cover():
+    # A decorative thingie to cover the ugly seam in the middle
+    model = cq.Workplane("XY").box(10, height, 1).edges("|Z").fillet(1)
+    vent = hex_vents(size=6, width=width * 0.9, height=height * 0.9, density=0.775)[0]
+
+    model = extrude_shape2(
+        model=model,
+        face=">Z",
+        w=width,
+        h=height,
+        x_offset=0.05 * width,
+        y_offset=0.05 * height,
+        hole=vent,
+        depth=3,
+    )
+    return model
+
+
+if __name__ == "__main__":
+    model = model()
+    exporters.export(model, "lid.stl")
+
+    cover = decorative_cover()
+    exporters.export(cover, "lid_cover.stl")
+
+    exporters.export(
+        model,
+        "lid.svg",
+        opt={
+            "projectionDir": (0, 0, 1),
+        },
+    )
+
+    exporters.export(
+        model.faces(">X").workplane(offset=-width / 2).split(keepTop=True),
+        "right_side_lid.stl",
+    )
+    exporters.export(
+        model.faces(">X").workplane(offset=-width / 2).split(keepBottom=True),
+        "left_side_lid.stl",
+    )

notebook_nueva/modelo.py

@@ -1,11 +1,14 @@
 import cadquery as cq
 from cadquery import exporters
+from cq_warehouse.drafting import Draft
 
 import audio_plug
 import battery_holder
+import hdmi_out
+import keyboard
+import screen_pillars
 import usb_hub
 import zero_holder as cpu_holder
-from utils import extrude_shape, punch_hole
 
 # Base for the notebook. Basically a kbd base that extends back
 # as much as possible
@@ -16,7 +19,6 @@ shell_t = 3
 # Size of the kbd board
 kbd_height = 95.5
 kbd_width = 305
-kbd_angle = 5
 
 # Size of the whole object
 width = kbd_width + 2 * shell_t
@@ -27,81 +29,37 @@ thickness = 27 + shell_t  # 27 inside
 ti_radius = 2.35
 ti_depth = 6.25
 
-# Positions are determined by measuring the keyboard
-
-kbd_pillar_positions = [
-    (18.25, -16),
-    (142.5, -25.5),
-    (kbd_width - 20, -16),
-    (23.5, -79.5),
-    (145.5, -82.5),
-    (kbd_width - 19, -79.5),
-]
-
-
-# 2-level mounting pillars for the kbd
-# Width of these need to be tweaked for
-# each specific keyboard
-kbd_pillars = (
-    cq.Sketch()
-    .push(kbd_pillar_positions)
-    .circle(2.2, mode="a")
-    # Holes for self-tapping screws
-    .circle(1.1, mode="s")
-)
-
-kbd_lower_pillars = (
-    cq.Sketch()
-    .push(kbd_pillar_positions)
-    .circle(4, mode="a")
-    # Holes for self-tapping screws
-    .circle(1.1, mode="s")
-)
-
 # These are placed where convenient, and are used to join the top and bottom
 # parts of the case.
 # Measured from top-left corner OUTSIDE
 mounting_pillar_positions = [
-    (6, -6),
-    (6, -40),
-    (120, -6),
-    (170, -6),
-    (width - 6, -6),
-    (width - 6, -30),
+    (6, 6),
+    (6, 48),
+    (120, 6),
+    (170, 6),
+    (width - 6, 6),
+    (width - 6, 30),
+    (120, 48),
+    (170, 48),
 ]
+screen_pillars.init(mounting_pillar_positions, thickness - shell_t)
 
-mounting_pillars = (
-    cq.Sketch()
-    .push(mounting_pillar_positions)
-    .trapezoid(12, 12, 90, mode="a")
-    .circle(1.8, mode="s")
-)
-
-screw_holes = cq.Sketch().push(mounting_pillar_positions).circle(3, mode="a")
-
-# Thing to "grab" the hub so it stays in place
-# Distance from edge to center of USB plug
-usb_offset = 48
+# Offset for the USB port from back-left corner
+# of the case to left side of the hub
+usb_offset_x = width - audio_plug.item_w - usb_hub.item_w
 
 
 # CPU holder position from back-left corner of the case
-cpu_offset_x = 160
-cpu_offset_y = 25
+cpu_offset_x = 177
+cpu_offset_y = 2
 
 # Battery holder position from back-left corner of the case
-battery_offset_x = 22
-battery_offset_y = 8
-
-# Offset for the USB port from back-right corner of the case
-usb_offset = 48
+battery_offset_x = 15
+battery_offset_y = 3
 
 
 def model():
     # Create the basic shape of the case bottom.
-
-    # Currently also adds keyboard stuff and things to connect
-    # to the screen case, but that should be refactored
-    # out (FIXME)
     model = (
         cq.Workplane("XY")
         .workplane(offset=thickness / 2)
@@ -112,129 +70,103 @@ def model():
         .fillet(2)
         .faces(">Z")
         .shell(-shell_t)
-        # Slanted mounting pillars on the kbd top
-        .faces(">Z")
-        .workplane(centerOption="CenterOfBoundBox")
-        # Top-left kbd corner inside the box
-        .center(-width / 2 + shell_t, kbd_height - height / 2 + shell_t)
-        .transformed(rotate=cq.Vector(kbd_angle, 0, 0))
-        # These two offsets push the keyboard "down" into the case
-        # and need to be adjusted per-keyboard
-        .tag("sloped")
-        .workplane(offset=-2.5)
-        .placeSketch(kbd_pillars)
-        .extrude(-1000)
-        .workplaneFromTagged("sloped")
-        .workplane(offset=-5.5)
-        .placeSketch(kbd_lower_pillars)
-        .extrude(-1000)
-        # Remove the excess extrusion
-        .workplaneFromTagged("mid_height")
-        .transformed(offset=cq.Vector(0, 0, -thickness / 2))
-        .split(keepTop=True)
-        # Slope for the beyboard
-        .workplaneFromTagged("sloped")
-        .split(keepBottom=True)
-        # Pillars to join with top half
-        .workplaneFromTagged("mid_height")
-        .workplane(offset=-thickness / 2, centerOption="CenterOfBoundBox")
-        .center(-width / 2, height / 2)
-        .placeSketch(mounting_pillars)
-        .extrude(thickness)
-        # Holes to insert screws from the bottom
-        .workplaneFromTagged("mid_height")
-        .workplane(offset=-thickness / 2, centerOption="CenterOfBoundBox")
-        .center(-width / 2, height / 2)
-        .placeSketch(screw_holes)
-        # 13 is 20-7 (screw thread length - threaded insert depth)
-        .cutBlind(thickness - 13)
     )
 
     # Now the basic box shape is in place, start adding things
     # and cutting holes.
 
-    # Holes in the back of the case for battery holder
-    for hole in battery_holder.holes:
-        model = punch_hole(
-            model=model,
-            face=">Y",
-            w=width,
-            h=thickness,
-            x_offset=width - battery_offset_x,
-            y_offset=shell_t,
-            hole=hole,
-            depth=shell_t,
-        )
-
-    # Hole for USB hub in the back
-    for hole in usb_hub.holes:
-        model = punch_hole(
-            model=model,
-            face=">Y",
-            w=width,
-            h=thickness,
-            x_offset=usb_offset + shell_t + usb_hub.holes[0]["width"] / 2,
-            y_offset=shell_t,
-            hole=hole,
-            depth=shell_t,
-        )
-
-    # USB hub holder
-    for element in usb_hub.elements:
-        model = extrude_shape(
-            model=model,
-            face="<Z",
-            w=width,
-            h=height,
-            x_offset=width - usb_offset - shell_t - +usb_hub.holes[0]["width"] / 2,
-            y_offset=shell_t + element["y"],
-            shape=element["shape"],
-            height=-(element["height"] + shell_t),
-        )
+    model = usb_hub.add(
+        model=model,
+        width=width,
+        height=height,
+        thickness=thickness,
+        bottom_face="<Z",
+        back_face=">Y",
+        offset_x=usb_offset_x,
+        offset_y=0,
+        shell_t=shell_t,
+    )
 
     # Hole for audio in right side
-    for hole in audio_plug.holes:
-        model = punch_hole(
-            model=model,
-            face=">X",
-            w=height,
-            h=thickness,
-            x_offset=height - shell_t - 34.5 - audio_plug.holes[0]["width"] / 2,
-            y_offset=shell_t,
-            hole=hole,
-            depth=shell_t,
-        )
+    model = audio_plug.add(
+        model=model,
+        width=width,
+        height=height,
+        thickness=thickness,
+        offset_x=width - audio_plug.item_w,
+        offset_y=40,
+        bottom_face="<Z",
+        back_face=">X",
+        shell_t=shell_t,
+    )
 
-    # Battery holder stands and pogo pin holder
-    for element in battery_holder.elements:
-        model = extrude_shape(
-            model=model,
-            face="<Z",
-            w=width,
-            h=height,
-            x_offset=battery_offset_x + element["x"],
-            y_offset=shell_t + battery_offset_y + element["y"],
-            shape=element["shape"],
-            height=-(element["height"] + shell_t),
-        )
+    # Hole for HDMI out in the back
+    model = hdmi_out.add(
+        model=model,
+        width=width,
+        height=height,
+        thickness=thickness,
+        offset_x=138,
+        offset_y=0,
+        bottom_face=None,
+        back_face=">Y",
+        shell_t=shell_t,
+    )
 
-    # CPU holder stands
-    for element in cpu_holder.elements:
-        model = extrude_shape(
-            model=model,
-            face="<Z",
-            w=width,
-            h=height,
-            x_offset=cpu_offset_x + element["x"],
-            y_offset=shell_t + cpu_offset_y + element["y"],
-            shape=element["shape"],
-            height=-(element["height"] + shell_t),
-        )
+    model = cpu_holder.add(
+        model=model,
+        width=width,
+        height=height,
+        thickness=thickness,
+        offset_x=cpu_offset_x,
+        offset_y=cpu_offset_y,
+        bottom_face="<Z",
+        back_face=None,  # Not exposing the holes
+        shell_t=shell_t,
+    )
+
+    # This adds all the holes and extrusions for the battery system
+    model = battery_holder.add(
+        model=model,
+        width=width,
+        height=height,
+        thickness=thickness,
+        offset_x=battery_offset_x,
+        offset_y=battery_offset_y,
+        bottom_face="<Z",
+        back_face=">Y",
+        shell_t=shell_t,
+    )
+
+    model = screen_pillars.add(
+        model=model,
+        width=width,
+        height=height,
+        thickness=thickness,
+        offset_x=0,
+        offset_y=0,
+        bottom_face="<Z",
+        back_face=None,
+        shell_t=shell_t,
+    )
+
+    model = keyboard.add(
+        model=model,
+        width=width,
+        height=height,
+        thickness=thickness,
+        bottom_face="<Z",
+        back_face=None,
+        offset_x=shell_t,
+        offset_y=kbd_height + shell_t,
+        shell_t=shell_t,
+    )
 
     return model
 
 
 if __name__ == "__main__":
+    model = model()
 
     left_cutout = cq.Sketch().polygon(
         [(0, 0), (width / 2, 0), (width / 2, -height), (0, -height), (0, 0)],
@@ -242,8 +174,7 @@ if __name__ == "__main__":
     )
 
     right_side = (
-        model()
-        .faces("<Z")
+        model.faces("<Z")
         .workplaneFromTagged("mid_height")
         .transformed(offset=cq.Vector(0, 0, -thickness / 2))
         .center(-width / 2, height / 2)
@@ -265,8 +196,7 @@ if __name__ == "__main__":
     )
 
     left_side = (
-        model()
-        .faces("<Z")
+        model.faces("<Z")
         .workplaneFromTagged("mid_height")
         .transformed(offset=cq.Vector(0, 0, -thickness / 2))
         .center(-width / 2, height / 2)
@@ -275,4 +205,38 @@ if __name__ == "__main__":
     )
     exporters.export(left_side, "left_side.stl")
 
-    exporters.export(model(), "model.stl")
+    draft = Draft(decimal_precision=1)
+    dimensions = []
+    dimensions.append(
+        draft.extension_line(
+            object_edge=[
+                cq.Vertex.makeVertex(-width / 2, -height / 2, 0),
+                cq.Vertex.makeVertex(width / 2, -height / 2, 0),
+            ],
+            offset=10.0,
+        )
+    )
+    dimensions.append(
+        draft.extension_line(
+            object_edge=[
+                cq.Vertex.makeVertex(width / 2, -height / 2, 0),
+                cq.Vertex.makeVertex(width / 2, height / 2, 0),
+            ],
+            offset=10.0,
+        )
+    )
+
+    exporters.export(model, "model.stl")
+
+    for d in dimensions[1:]:
+        dimensions[0].add(d.toCompound())
+    dimensions[0].add(model)
+
+    exporters.export(
+        dimensions[0].toCompound(),
+        "model.svg",
+        opt={
+            "projectionDir": (0, 0, 1),
+            "strokeWidth": 0.3,
+        },
+    )

notebook_nueva/requirements.txt

@@ -0,0 +1,2 @@
+cadquery
+git+https://github.com/gumyr/cq_warehouse.git#egg=cq_warehouse

notebook_nueva/screen_mount.py

@@ -42,6 +42,9 @@ board_cutout = cq.Sketch().trapezoid(
 
 kbd_cable_hole = cq.Sketch().trapezoid(20, 9, 90, mode="a").vertices().fillet(1)
 
+# y needs to be inverted because this is the top side, adn there's 2 pillars we don't use
+mounting_pillar_positions = [(x, -y) for x, y in mounting_pillar_positions[:-2]]
+
 mounting_pillars = (
     cq.Sketch()
     .push(mounting_pillar_positions)
@@ -119,7 +122,7 @@ def model():
         .cutBlind(-6)
         .workplaneFromTagged("mid_height")
         .workplane(offset=-thickness / 2, centerOption="CenterOfBoundBox")
-        .center(-width / 2, height_bottom - height / 2)
+        .center(-width / 2, height_bottom - height / 2 - shell_t)
         .placeSketch(mounting_pillars)
         .extrude(10)
         # Fillet the front edge of the screen case so it looks softer
@@ -129,7 +132,6 @@ def model():
 
 
 if __name__ == "__main__":
-
     print("Exporting")
     exporters.export(model(), "screen_mount.stl")
 

notebook_nueva/screen_pillars.py

@@ -0,0 +1,75 @@
+from utils import extrude_shape, punch_hole
+import cadquery as cq
+
+elements = None
+bottom_holes = None  # Not really vents FIXME
+
+
+def init(positions, thickness):
+    """Because these need to match in multiple models, we create the
+    elemments dynamically"""
+    global elements, bottom_holes
+    elements = [
+        {
+            "x": 0,
+            "y": 0,
+            "shape": cq.Sketch().push(positions).trapezoid(12, 12, 90, mode="a"),
+            "height": thickness,
+        }
+    ]
+
+    bottom_holes = [
+        {
+            "x": 0,
+            "y": 0,
+            "shape": cq.Sketch().push(positions).circle(3, mode="a"),
+            "depth": thickness - 13,  # (screw thread length - threaded insert depth)
+        },
+        {
+            "x": 0,
+            "y": 0,
+            "shape": cq.Sketch().push(positions).circle(1.8, mode="a"),
+            "depth": 100,
+        },
+    ]
+
+
+def add(
+    *,
+    model,
+    width,
+    height,
+    thickness,
+    offset_x,
+    offset_y,
+    bottom_face,
+    back_face,
+    shell_t
+):
+    if bottom_face:
+        # Mounting pillars
+        for element in elements:
+            model = extrude_shape(
+                model=model,
+                face=bottom_face,
+                w=width,
+                h=height,
+                x_offset=offset_x,
+                y_offset=shell_t + offset_y,
+                element=element,
+                height=-(element["height"] + shell_t),
+            )
+        # Screw holes
+        for hole in bottom_holes:
+            model = punch_hole(
+                model=model,
+                face=bottom_face,
+                w=width,
+                h=height,
+                x_offset=offset_x,
+                y_offset=shell_t + offset_y,
+                hole=hole,
+                depth=hole["depth"],
+            )
+
+    return model

notebook_nueva/usb_hub.py

@@ -1,33 +1,101 @@
 import cadquery as cq
 
+from utils import punch_hole, extrude_shape
+
 # Measurements for my USB hub, YMMV
 
 # The hole is for a USB-A plug, y is measured in the hub
 # (from the bottom face to middle of the hole)
 # Consumers should set proper offsets for the hole
 
+item_w = 17
+item_h = 93
+
 holes = [
     # USB-A port
     {
-        "x": 0,
+        "x": -item_w / 2,
         "y": 4,
-        "height": 5.5,
-        "width": 13,
-        "fillet": 2,
+        "shape": cq.Sketch().trapezoid(13, 5, 90, mode="a").vertices().fillet(1),
     },
 ]
 
 elements = [
     # Thing to grab the hub
     {
-        "x": 0,
+        "x": item_w / 2,
         "y": 5,
         "shape": (
-            cq.Sketch()
-            .trapezoid(22, 10, 90, mode="a")
-            .trapezoid(17, 10, 90, mode="s")
-            .clean()
+            cq.Sketch().trapezoid(22, 10, 90, mode="a").trapezoid(17, 10, 90, mode="s")
         ),
         "height": 8,
-    }
+    },
+    {
+        "x": item_w / 2 + 5,
+        "y": item_h - 3,
+        "shape": (cq.Sketch().circle(2.5, mode="a")),
+        "height": 8,
+    },
+    {
+        "x": item_w / 2 - 5,
+        "y": item_h - 3,
+        "shape": (cq.Sketch().circle(2.5, mode="a")),
+        "height": 8,
+    },
+    # Outline
+    {
+        "x": item_w / 2,
+        "y": item_h / 2,
+        "shape": (
+            cq.Sketch()
+            .trapezoid(item_w, item_h, 90, mode="a")
+            .trapezoid(item_w - 2, item_h - 2, 90, mode="s")
+            .vertices()
+            .fillet(3)
+        ),
+        "height": 0.2,
+    },
 ]
+
+
+def add(
+    *,
+    model,
+    width,
+    height,
+    thickness,
+    offset_x,
+    offset_y,
+    bottom_face,
+    back_face,
+    shell_t
+):
+    # USB Hub extrusions
+    if bottom_face:
+        for element in elements:
+            model = extrude_shape(
+                model=model,
+                face=bottom_face,
+                w=width,
+                h=height,
+                x_offset=offset_x,
+                y_offset=shell_t + offset_y,
+                element=element,
+                height=-(element["height"] + shell_t),
+            )
+
+    # Holes
+    if back_face:
+        for hole in holes:
+            model = punch_hole(
+                model=model,
+                face=back_face,
+                w=width,
+                h=thickness,
+                x_offset=width - offset_x,
+                y_offset=shell_t,
+                hole=hole,
+                depth=shell_t,
+            )
+
+    return model

notebook_nueva/utils.py

@@ -1,12 +1,13 @@
 import cadquery as cq
+from math import floor
 
-# TODO make API of extrude_shape and punch_hole more consistent
-def extrude_shape(*, model, face, w, h, x_offset, y_offset, shape, height):
+
+def extrude_shape(*, model, face, w, h, x_offset, y_offset, element, height):
     return (
         model.faces(face)
         .workplane(centerOption="CenterOfBoundBox")
-        .center(-w / 2 + x_offset, -h / 2 + y_offset)
-        .placeSketch(shape)
+        .center(-w / 2 + x_offset + element["x"], -h / 2 + y_offset + element["y"])
+        .placeSketch(element["shape"])
         .extrude(height)
     )
 
@@ -16,11 +17,57 @@ def punch_hole(*, model, face, w, h, x_offset, y_offset, hole, depth):
         model.faces(face)
         .workplane(centerOption="CenterOfBoundBox")
         .center(-w / 2 + x_offset + hole["x"], -h / 2 + y_offset + hole["y"])
-        .placeSketch(
-            cq.Sketch()
-            .trapezoid(hole["width"], hole["height"], 90, mode="a")
-            .vertices()
-            .fillet(hole["fillet"])
-        )
+        .placeSketch(hole["shape"])
         .cutBlind(-depth)
     )
+
+
+def extrude_shape2(*, model, face, w, h, x_offset, y_offset, hole, depth):
+    return (
+        model.faces(face)
+        .workplane(centerOption="CenterOfBoundBox")
+        .center(-w / 2 + x_offset + hole["x"], -h / 2 + y_offset + hole["y"])
+        .placeSketch(hole["shape"])
+        .extrude(-depth)
+    )
+
+
+def hex_vents(*, size, width, height, density=0.85):
+    # size is radius of the hexagon
+    # Information about how this works:
+    # https://www.redblobgames.com/grids/hexagons/
+
+    x_step = size * (3**0.5)
+    y_step = size * 3 / 2
+
+    x_count = floor(width / x_step) - 1
+
+    if height > 4 * size:
+        y_count = floor((height - 2 * size) / (1.5 * size))
+    else:
+        y_count = 1
+
+    x_size = (x_count + 0.5) * x_step  # Assumes at least 2 rows
+    y_size = 2 * size + 1.5 * size * (y_count - 1)
+
+    x_offset = (width - x_size) / 2 + 0.5 * x_step
+    y_offset = (height - y_size) / 2 + size
+
+    vent_positions = []
+    for x in range(0, x_count):
+        for y in range(0, y_count):
+            vent_positions.append(
+                (
+                    (x + (y % 2) / 2) * x_step + x_offset,
+                    y * y_step + y_offset,
+                )
+            )
+    vents = [
+        {
+            "x": 0,
+            "y": 0,
+            "shape": cq.Sketch().push(vent_positions).regularPolygon(size * density, 6),
+        }
+    ]
+
+    return vents

notebook_nueva/zero_holder.py

@@ -1,10 +1,18 @@
 import cadquery as cq
 
-positions = [(0, 0), (0, 23), (58, 23), (58, 0)]
+from utils import extrude_shape, punch_hole, hex_vents
 
-stands = cq.Sketch().push(positions).circle(3, mode="a").circle(2.65 / 2, mode="s")
+width = 65
+height = 30
 pillar_height = 7
 
+stand_positions = [(3.5, 3.5), (3.5, 26.5), (61.5, 26.5), (61.5, 3.5)]
+
+stands = (
+    cq.Sketch().push(stand_positions).circle(3, mode="a").circle(2.65 / 2, mode="s")
+)
+
+
 elements = [
     # CPU holder stands
     {
@@ -12,5 +20,91 @@ elements = [
         "y": 0,
         "shape": stands,
         "height": pillar_height,
+    },
+    {
+        "x": 0,
+        "y": 0,
+        "shape": cq.Sketch().push(stand_positions).circle(5),
+        "height": 0,
+    },
+    # Perimeter
+    {
+        "x": width / 2,
+        "y": height / 2,
+        "shape": (
+            cq.Sketch()
+            .trapezoid(width, height, 90, mode="a")
+            .trapezoid(width - 2, height - 2, 90, mode="s")
+            .vertices()
+            .fillet(3)
+        ),
+        "height": 0.2,
+    },
+]
+
+vents = hex_vents(size=3, width=width, height=height)
+
+holes = [
+    # One hole for everything TODO: improve
+    {
+        "x": -width / 2,
+        "y": 1 + pillar_height,
+        "shape": cq.Sketch().trapezoid(50, 6, 90, mode="a").vertices().fillet(1),
     }
 ]
+
+
+def add(
+    *,
+    model,
+    width,
+    height,
+    thickness,
+    offset_x,
+    offset_y,
+    bottom_face,
+    back_face,
+    shell_t
+):
+    if bottom_face:
+        # Vents
+        for vent in vents:
+            model = punch_hole(
+                model=model,
+                face=bottom_face,
+                w=width,
+                h=height,
+                x_offset=offset_x + vent["x"],
+                y_offset=shell_t + offset_y + vent["y"],
+                hole=vent,
+                depth=shell_t,
+            )
+
+        # CPU holder extrusions
+        for element in elements:
+            model = extrude_shape(
+                model=model,
+                face=bottom_face,
+                w=width,
+                h=height,
+                x_offset=offset_x,
+                y_offset=shell_t + offset_y,
+                element=element,
+                height=-(element["height"] + shell_t),
+            )
+
+    # Holes
+    if back_face:
+        for hole in holes:
+            model = punch_hole(
+                model=model,
+                face=back_face,
+                w=width,
+                h=thickness,
+                x_offset=width - offset_x,
+                y_offset=shell_t,
+                hole=hole,
+                depth=shell_t,
+            )
+
+    return model