Integrate heuristics into lexer selection

.ameba.yml

@@ -1,9 +1,9 @@
 # This configuration file was generated by `ameba --gen-config`
-# on 2024-09-21 14:59:30 UTC using Ameba version 1.6.1.
+# on 2024-08-12 22:00:49 UTC using Ameba version 1.6.1.
 # The point is for the user to remove these configuration records
 # one by one as the reported problems are removed from the code base.
 
-# Problems found: 3
+# Problems found: 2
 # Run `ameba --only Documentation/DocumentationAdmonition` for details
 Documentation/DocumentationAdmonition:
   Description: Reports documentation admonitions
@@ -18,17 +18,104 @@ Documentation/DocumentationAdmonition:
   Enabled: true
   Severity: Warning
 
-# Problems found: 1
-# Run `ameba --only Lint/SpecFilename` for details
-Lint/SpecFilename:
-  Description: Enforces spec filenames to have `_spec` suffix
+# Problems found: 22
+# Run `ameba --only Lint/MissingBlockArgument` for details
+Lint/MissingBlockArgument:
+  Description: Disallows yielding method definitions without block argument
   Excluded:
-  - spec/examples/crystal/hello.cr
-  IgnoredDirs:
-  - spec/support
-  - spec/fixtures
-  - spec/data
-  IgnoredFilenames:
-  - spec_helper
+  - pygments/tests/examplefiles/cr/test.cr
   Enabled: true
   Severity: Warning
+
+# Problems found: 1
+# Run `ameba --only Lint/NotNil` for details
+Lint/NotNil:
+  Description: Identifies usage of `not_nil!` calls
+  Excluded:
+  - pygments/tests/examplefiles/cr/test.cr
+  Enabled: true
+  Severity: Warning
+
+# Problems found: 34
+# Run `ameba --only Lint/ShadowingOuterLocalVar` for details
+Lint/ShadowingOuterLocalVar:
+  Description: Disallows the usage of the same name as outer local variables for block
+    or proc arguments
+  Excluded:
+  - pygments/tests/examplefiles/cr/test.cr
+  Enabled: true
+  Severity: Warning
+
+# Problems found: 1
+# Run `ameba --only Lint/UnreachableCode` for details
+Lint/UnreachableCode:
+  Description: Reports unreachable code
+  Excluded:
+  - pygments/tests/examplefiles/cr/test.cr
+  Enabled: true
+  Severity: Warning
+
+# Problems found: 6
+# Run `ameba --only Lint/UselessAssign` for details
+Lint/UselessAssign:
+  Description: Disallows useless variable assignments
+  ExcludeTypeDeclarations: false
+  Excluded:
+  - pygments/tests/examplefiles/cr/test.cr
+  Enabled: true
+  Severity: Warning
+
+# Problems found: 3
+# Run `ameba --only Naming/BlockParameterName` for details
+Naming/BlockParameterName:
+  Description: Disallows non-descriptive block parameter names
+  MinNameLength: 3
+  AllowNamesEndingInNumbers: true
+  Excluded:
+  - pygments/tests/examplefiles/cr/test.cr
+  AllowedNames:
+  - _
+  - e
+  - i
+  - j
+  - k
+  - v
+  - x
+  - y
+  - ex
+  - io
+  - ws
+  - op
+  - tx
+  - id
+  - ip
+  - k1
+  - k2
+  - v1
+  - v2
+  ForbiddenNames: []
+  Enabled: true
+  Severity: Convention
+
+# Problems found: 1
+# Run `ameba --only Naming/RescuedExceptionsVariableName` for details
+Naming/RescuedExceptionsVariableName:
+  Description: Makes sure that rescued exceptions variables are named as expected
+  Excluded:
+  - pygments/tests/examplefiles/cr/test.cr
+  AllowedNames:
+  - e
+  - ex
+  - exception
+  - error
+  Enabled: true
+  Severity: Convention
+
+# Problems found: 6
+# Run `ameba --only Naming/TypeNames` for details
+Naming/TypeNames:
+  Description: Enforces type names in camelcase manner
+  Excluded:
+  - pygments/tests/examplefiles/cr/test.cr
+  Enabled: true
+  Severity: Convention

.github/workflows/ci.yml

@@ -1,26 +0,0 @@
-name: Tests
-on:
-  # This can't yet run automatically, because tests fail because of
-  # different versions of chroma. Need to get the same one in my
-  # local env and in CI
-  workflow_dispatch:
-  push:
-permissions:
-  contents: read
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Download source
-        uses: actions/checkout@v4
-      - name: Install Crystal
-        uses: crystal-lang/install-crystal@v1
-      - name: Run tests
-        run: |
-          wget https://github.com/alecthomas/chroma/releases/download/v2.14.0/chroma-2.14.0-linux-amd64.tar.gz
-          tar xzvf chroma-2.14.0*gz
-          mkdir ~/.local/bin -p
-          sudo mv chroma ~/.local/bin
-          shards install
-          crystal tool format --check
-          crystal spec -v

.github/workflows/coverage.yml

@@ -1,30 +0,0 @@
-name: Coverage
-on:
-  workflow_dispatch:
-  schedule:
-    - cron: "0 1 * * *"
-permissions:
-  contents: read
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Download source
-        uses: actions/checkout@v4
-      - name: Install Crystal
-        uses: crystal-lang/install-crystal@v1
-      - name: Run tests using kcov
-        run: |
-          sudo apt update && sudo apt install kcov
-          wget https://github.com/alecthomas/chroma/releases/download/v2.14.0/chroma-2.14.0-linux-amd64.tar.gz
-          tar xzvf chroma-2.14.0*gz
-          mkdir ~/.local/bin -p
-          sudo mv chroma ~/.local/bin
-          shards install
-          crystal build src/run_tests.cr
-          kcov --clean --include-path=./src $PWD/coverage ./run_tests
-          curl -Os https://uploader.codecov.io/latest/linux/codecov
-          chmod +x codecov
-          ./codecov -t ${CODECOV_TOKEN} -s coverage
-        env:
-          CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}

.gitignore

@@ -9,6 +9,3 @@ shard.lock
 .vscode/
 .crystal/
 venv/
-.croupier
-coverage/
-run_tests

.md.rb

@@ -1,3 +0,0 @@
-exclude_rule 'MD033' # Inline HTML
-exclude_rule 'MD005' # 3-space indent for lists
-exclude_rule 'MD024' # Repeated headings

.mdlrc

@@ -1 +0,0 @@
-style ".md.rb"

.pre-commit-config.yaml

@@ -1,35 +0,0 @@
-# See https://pre-commit.com for more information
-# See https://pre-commit.com/hooks.html for more hooks
-
-repos:
-    - repo: https://github.com/pre-commit/pre-commit-hooks
-      rev: v4.6.0
-      hooks:
-          - id: trailing-whitespace
-          - id: end-of-file-fixer
-          - id: check-yaml
-          - id: check-added-large-files
-          - id: check-merge-conflict
-    - repo: https://github.com/jumanjihouse/pre-commit-hooks
-      rev: 3.0.0
-      hooks:
-          - id: shellcheck
-          - id: markdownlint
-            exclude: '^content'
-    - repo: https://github.com/mrtazz/checkmake
-      rev: 0.2.2
-      hooks:
-          - id: checkmake
-            exclude: lexers/makefile.xml
-    - repo: https://github.com/python-jsonschema/check-jsonschema
-      rev: 0.29.2
-      hooks:
-          - id: check-github-workflows
-    - repo: https://github.com/commitizen-tools/commitizen
-      rev: v3.29.0 # automatically updated by Commitizen
-      hooks:
-        - id: commitizen
-        - id: commitizen-branch
-          stages:
-            - post-commit
-            - push

CHANGELOG.md

@@ -1,127 +0,0 @@
-# Changelog
-
-All notable changes to this project will be documented in this file.
-
-## [0.11.1] - 2024-10-14
-
-### 🐛 Bug Fixes
-
-- Support choosing lexers when used as a library
-
-## [0.11.0] - 2024-10-14
-
-### 🚀 Features
-
-- Support selecting only some themes
-
-## [0.10.0] - 2024-09-26
-
-### 🚀 Features
-
-- Optional conditional baking of lexers
-
-### 🐛 Bug Fixes
-
-- Strip binaries for release artifacts
-- Fix metadata to show crystal
-
-## [0.9.1] - 2024-09-22
-
-### 🐛 Bug Fixes
-
-- Terminal formatter was skipping things that it could highlight
-- Bug in high-level API for png formatter
-
-### 🧪 Testing
-
-- Added minimal tests for svg and png formatters
-
-## [0.9.0] - 2024-09-21
-
-### 🚀 Features
-
-- PNG writer based on Stumpy libs
-
-### ⚙️ Miscellaneous Tasks
-
-- Clean
-- Detect version bump in release script
-- Improve changelog handling
-
-## [0.8.0] - 2024-09-21
-
-### 🚀 Features
-
-- SVG formatter
-
-### 🐛 Bug Fixes
-
-- HTML formatter was setting bold wrong
-
-### 📚 Documentation
-
-- Added instructions to add as a dependency
-
-### 🧪 Testing
-
-- Add basic tests for crystal and delegating lexers
-- Added tests for CSS generation
-
-### ⚙ Miscellaneous Tasks
-
-- Fix example code in README
-
-## [0.7.0] - 2024-09-10
-
-### 🚀 Features
-
-- Higher level API (`to_html` and `to_ansi`)
-- Use the native crystal highlighter
-
-### 🐛 Bug Fixes
-
-- Ameba
-- Variable bame in Hacefile
-- Make it easier to import the Ansi formatter
-- Renamed BaseLexer to Lexer and Lexer to RegexLexer to make API nicer
-- Make install work
-
-### 📚 Documentation
-
-- Mention AUR package
-
-### 🧪 Testing
-
-- Add CI workflows
-
-### ⚙️ Miscellaneous Tasks
-
-- Pre-commit hooks
-- Git-cliff config
-- Started changelog
-- Force conventional commit messages
-- Force conventional commit messages
-- Updated pre-commit
-- *(ignore)* Fix tests
-- Added badges
-- Added badges
-- *(ignore)* Removed random file
-
-### Build
-
-- Switch from Makefile to Hacefile
-- Added do_release script
-- Fix markdown check
-
-### Bump
-
-- Release v0.6.4
-- Release v0.6.4
-
-## [0.6.1] - 2024-08-25
-
-### 📚 Documentation
-
-- Improve readme and help message
-
-<!-- generated by git-cliff -->

Hacefile.yml

@@ -1,137 +0,0 @@
-variables:
-  FLAGS: "-d --error-trace"
-  NAME: "tartrazine"
-
-tasks:
-  build:
-    default: true
-    dependencies:
-      - src
-      - shard.lock
-      - shard.yml
-      - Hacefile.yml
-      - lexers/*xml
-      - styles/*xml
-    outputs:
-      - bin/{{NAME}}
-    commands: |
-      shards build {{FLAGS}}
-
-  get-deps:
-    dependencies:
-      - shard.yml
-    outputs:
-      - shard.lock
-    commands: |
-      shards install
-
-  build-release:
-    phony: true
-    always_run: true
-    commands: |
-      hace build FLAGS="--release"
-
-  install:
-    phony: true
-    always_run: true
-    dependencies:
-      - bin/{{NAME}}
-    commands: |
-      rm ${HOME}/.local/bin/{{NAME}} -f
-      cp bin/{{NAME}} ${HOME}/.local/bin/{{NAME}}
-
-  static:
-    outputs:
-      - bin/{{NAME}}-static-linux-amd64
-      - bin/{{NAME}}-static-linux-arm64
-    commands: |
-      hace clean
-      ./build_static.sh
-
-  test:
-    dependencies:
-      - src
-      - spec
-      - shard.lock
-      - shard.yml
-    commands: |
-      crystal spec -v --error-trace
-    phony: true
-    always_run: true
-
-  lint:
-    dependencies:
-      - src
-      - spec
-      - shard.lock
-      - shard.yml
-    commands: |
-      crystal tool format src/*.cr spec/*.cr
-      ameba --fix
-    always_run: true
-    phony: true
-
-  docs:
-    dependencies:
-      - src
-      - shard.lock
-      - shard.yml
-      - README.md
-    commands: |
-      crystal docs
-    outputs:
-      - docs/index.html
-
-  pre-commit:
-    default: true
-    outputs:
-      - .git/hooks/commit-msg
-      - .git/hooks/pre-commit
-    dependencies:
-      - .pre-commit-config.yaml
-    commands: |
-      pre-commit install --hook-type commit-msg
-      pre-commit install
-
-  clean:
-    phony: true
-    always_run: true
-    commands: |
-      rm -rf shard.lock bin lib
-
-  coverage:
-    dependencies:
-      - src
-      - spec
-      - shard.lock
-      - shard.yml
-    commands: |
-      shards install
-      crystal build -o bin/run_tests src/run_tests.cr
-      rm -rf coverage/
-      mkdir coverage
-      kcov --clean --include-path=./src ${PWD}/coverage ./bin/run_tests
-    outputs:
-      - coverage/index.html
-
-  loc:
-    phony: true
-    always_run: true
-    dependencies:
-      - src
-    commands: |
-      tokei src -e src/constants/
-
-  aur:
-    phony: true
-    always_run: true
-    commands: |
-      rm -rf aur-{{NAME}}
-      git clone ssh://aur@aur.archlinux.org/{{NAME}}.git aur-{{NAME}}
-      sed s/pkgver=.*/pkgver=$(shards version)/ -i aur-{{NAME}}/PKGBUILD
-      sed s/pkgrel=.*/pkgrel=1/ -i aur-{{NAME}}/PKGBUILD
-      cd aur-{{NAME}} && updpkgsums && makepkg --printsrcinfo > .SRCINFO
-      cd aur-{{NAME}} && makepkg -fsr
-      cd aur-{{NAME}} && git add PKGBUILD .SRCINFO
-      cd aur-{{NAME}} && git commit -a -m "Update to $(shards version)"
-      cd aur-{{NAME}} && git push

Makefile

@@ -0,0 +1,7 @@
+build: $(wildcard src/**/*.cr) $(wildcard lexers/*xml) $(wildcard styles/*xml) shard.yml
+	shards build -Dstrict_multi_assign -Dno_number_autocast -d --error-trace
+release: $(wildcard src/**/*.cr) $(wildcard lexers/*xml) $(wildcard styles/*xml) shard.yml
+	shards build --release
+static: $(wildcard src/**/*.cr) $(wildcard lexers/*xml) $(wildcard styles/*xml) shard.yml
+	shards build --release --static
+	strip bin/tartrazine

README.md

@@ -1,145 +1,12 @@
 # TARTRAZINE
 
-[![Tests](https://github.com/ralsina/tartrazine/actions/workflows/ci.yml/badge.svg)](https://github.com/ralsina/tartrazine/actions/workflows/ci.yml)
-[![codecov](https://codecov.io/gh/ralsina/tartrazine/branch/main/graph/badge.svg?token=52XBPNL99F)](https://codecov.io/gh/ralsina/tartrazine)
-
 Tartrazine is a library to syntax-highlight code. It is
 a port of [Pygments](https://pygments.org/) to
-[Crystal](https://crystal-lang.org/).
+[Crystal](https://crystal-lang.org/). Kind of.
 
-It also provides a CLI tool which can be used to highlight many things in many styles.
+The CLI tool can be used to highlight many things in many styles.
 
-Currently Tartrazine supports 247 languages and has 331 themes (63 from Chroma,
-the rest are base16 themes via [Sixteen](https://github.com/ralsina/sixteen)
-
-## Installation
-
-If you are using Arch: Use yay or your favourite AUR helper, package name is `tartrazine`.
-
-From prebuilt binaries:
-
-Each release provides statically-linked binaries that should
-work on any Linux. Get them from the [releases page](https://github.com/ralsina/tartrazine/releases)
-and put them in your PATH.
-
-To build from source:
-
-1. Clone this repo
-2. Run `make` to build the `tartrazine` binary
-3. Copy the binary somewhere in your PATH.
-
-## Usage as a CLI tool
-
-Show a syntax highlighted version of a C source file in your terminal:
-
-```shell
-tartrazine whatever.c -l c -t catppuccin-macchiato --line-numbers -f terminal
-```
-
-Generate a standalone HTML file from a C source file with the syntax highlighted:
-
-```shell
-$ tartrazine whatever.c -t catppuccin-macchiato --line-numbers \
-  --standalone -f html -o whatever.html
-```
-
-## Usage as a Library
-
-Add to your `shard.yml`:
-
-```yaml
-dependencies:
-  tartrazine:
-    github: ralsina/tartrazine
-```
-
-This is the high level API:
-
-```crystal
-require "tartrazine"
-
-html = Tartrazine.to_html(
-  "puts \"Hello, world!\"",
-  language: "crystal",
-  theme: "catppuccin-macchiato",
-  standalone: true,
-  line_numbers: true
-)
-```
-
-This does more or less the same thing, but more manually:
-
-```crystal
-lexer = Tartrazine.lexer("crystal")
-formatter = Tartrazine::Html.new(
-  theme: Tartrazine.theme("catppuccin-macchiato"),
-  line_numbers: true,
-  standalone: true,
-)
-puts formatter.format("puts \"Hello, world!\"", lexer)
-```
-
-The reason you may want to use the manual version is to reuse
-the lexer and formatter objects for performance reasons.
-
-## Choosing what Lexers you want
-
-By default Tartrazine will support all its lexers by embedding
-them in the binary. This makes the binary large. If you are
-using it as a library, you may want to just include a selection of lexers. To do that:
-
-* Pass the `-Dnolexers` flag to the compiler
-* Set the `TT_LEXERS` environment variable to a
-  comma-separated list of lexers you want to include.
-
-
-This builds a binary with only the python, markdown, bash and yaml lexers (enough to highlight this `README.md`):
-
-```bash
-> TT_LEXERS=python,markdown,bash,yaml shards build -Dnolexers -d --error-trace
-Dependencies are satisfied
-Building: tartrazine
-```
-
-## Choosing what themes you want
-
-Themes come from two places, tartrazine itself and [Sixteen](https://github.com/ralsina/sixteen).
-
-To only embed selected themes, build your project with the `-Dnothemes` option, and
-you can set two environment variables to control which themes are included:
-
-* `TT_THEMES` is a comma-separated list of themes to include from tartrazine (see the styles directory in the source)
-* `SIXTEEN_THEMES` is a comma-separated list of themes to include from Sixteen (see the base16 directory in the sixteen source)
-
-For example (using the tartrazine CLI as the project):
-
-```bash
-$ TT_THEMES=colorful,autumn SIXTEEN_THEMES=pasque,pico shards build -Dnothemes
-Dependencies are satisfied
-Building: tartrazine
-
-$ ./bin/tartrazine  --list-themes
-autumn
-colorful
-pasque
-pico
-```
-
-Be careful not to build without any themes at all, nothing will work.
-
-## Contributing
-
-1. Fork it (<https://github.com/ralsina/tartrazine/fork>)
-2. Create your feature branch (`git checkout -b my-new-feature`)
-3. Commit your changes (`git commit -am 'Add some feature'`)
-4. Push to the branch (`git push origin my-new-feature`)
-5. Create a new Pull Request
-
-## Contributors
-
-- [Roberto Alsina](https://github.com/ralsina) - creator and maintainer
-
-## A port of what, and why "kind of"
+# A port of what? Why "kind of"?
 
 Pygments is a staple of the Python ecosystem, and it's great.
 It lets you highlight code in many languages, and it has many
@@ -153,15 +20,70 @@ Chroma has taken most of the Pygments lexers and turned them into
 XML descriptions. What I did was take those XML files from Chroma
 and a pile of test cases from Pygments, and I slapped them together
 until the tests passed and my code produced the same output as
-Chroma. Think of it as [*extreme TDD*](https://ralsina.me/weblog/posts/tartrazine-reimplementing-pygments.html)
+Chroma. Think of it as *extreme TDD*.
 
 Currently the pass rate for tests in the supported languages
 is `96.8%`, which is *not bad for a couple days hacking*.
 
 This only covers the RegexLexers, which are the most common ones,
 but it means the supported languages are a subset of Chroma's, which
-is a subset of Pygments' and DelegatingLexers (useful for things like template languages)
+is a subset of Pygments'.
 
-Then performance was bad, so I hacked and hacked and made it significantly
-[faster than chroma](https://ralsina.me/weblog/posts/a-tale-of-optimization.html)
-which is fun.
+Currently Tartrazine supports ... 248 languages.
+
+It has 331 themes (63 from Chroma, the rest are base16 themes via
+[Sixteen](https://github.com/ralsina/sixteen)
+
+## Installation
+
+From prebuilt binaries:
+
+Each release provides statically-linked binaries that should
+work on any Linux. Get them from the [releases page](https://github.com/ralsina/tartrazine/releases) and put them in your PATH.
+
+To build from source:
+
+1. Clone this repo
+2. Run `make` to build the `tartrazine` binary
+3. Copy the binary somewhere in your PATH.
+
+## Usage as a CLI tool
+
+Show a syntax highlighted version of a C source file in your terminal:
+
+```shell
+$ tartrazine whatever.c -l c -t catppuccin-macchiato --line-numbers -f terminal
+```
+
+Generate a standalone HTML file from a C source file with the syntax highlighted:
+
+```shell
+$ tartrazine whatever.c -l c -t catppuccin-macchiato --line-numbers \
+  --standalone -f html -o whatever.html 
+```
+
+## Usage as a Library
+
+This works:
+
+```crystal
+require "tartrazine"
+
+lexer = Tartrazine.lexer("crystal")
+theme = Tartrazine.theme("catppuccin-macchiato")
+formatter = Tartrazine::Html.new
+formatter.theme = theme
+puts formatter.format(File.read(ARGV[0]), lexer)
+```
+
+## Contributing
+
+1. Fork it (<https://github.com/ralsina/tartrazine/fork>)
+2. Create your feature branch (`git checkout -b my-new-feature`)
+3. Commit your changes (`git commit -am 'Add some feature'`)
+4. Push to the branch (`git push origin my-new-feature`)
+5. Create a new Pull Request
+
+## Contributors
+
+- [Roberto Alsina](https://github.com/ralsina) - creator and maintainer

TODO.md

@@ -8,8 +8,8 @@
 * ✅ Implement lexer loader that respects aliases
 * ✅ Implement lexer loader by file extension
 * ✅ Add --line-numbers to terminal formatter
-* ✅ Implement lexer loader by mime type
+* Implement lexer loader by mime type
 * ✅ Implement Delegating lexers
 * ✅ Add RstLexer
 * Add Mako template lexer
-* ✅ Implement heuristic lexer detection
+* Implement heuristic lexer detection

build_static.sh

@@ -7,10 +7,10 @@ docker run --rm --privileged \
 
 # Build for AMD64
 docker build . -f Dockerfile.static -t tartrazine-builder
-docker run -ti --rm -v "$PWD":/app --user="$UID" tartrazine-builder /bin/sh -c "cd /app && rm -rf lib shard.lock && shards build --static --release && strip bin/tartrazine"
+docker run -ti --rm -v "$PWD":/app --user="$UID" tartrazine-builder /bin/sh -c "cd /app && rm -rf lib shard.lock && make static"
 mv bin/tartrazine bin/tartrazine-static-linux-amd64
 
 # Build for ARM64
 docker build . -f Dockerfile.static --platform linux/arm64 -t tartrazine-builder
-docker run -ti --rm -v "$PWD":/app --platform linux/arm64 --user="$UID" tartrazine-builder /bin/sh -c "cd /app && rm -rf lib shard.lock && shards build --static --release && strip bin/tartrazine"
+docker run -ti --rm -v "$PWD":/app --platform linux/arm64 --user="$UID" tartrazine-builder /bin/sh -c "cd /app && rm -rf lib shard.lock && make static"
 mv bin/tartrazine bin/tartrazine-static-linux-arm64

cliff.toml

@@ -1,79 +0,0 @@
-# git-cliff ~ default configuration file
-# https://git-cliff.org/docs/configuration
-#
-# Lines starting with "#" are comments.
-# Configuration options are organized into tables and keys.
-# See documentation for more information on available options.
-
-[changelog]
-# template for the changelog header
-header = """
-# Changelog\n
-All notable changes to this project will be documented in this file.\n
-"""
-# template for the changelog body
-# https://keats.github.io/tera/docs/#introduction
-body = """
-{% if version %}\
-    ## [{{ version | trim_start_matches(pat="v") }}] - {{ timestamp | date(format="%Y-%m-%d") }}
-{% else %}\
-    ## [unreleased]
-{% endif %}\
-{% for group, commits in commits | group_by(attribute="group") %}
-    ### {{ group | striptags | trim | upper_first }}
-    {% for commit in commits %}
-        - {% if commit.scope %}*({{ commit.scope }})* {% endif %}\
-            {% if commit.breaking %}[**breaking**] {% endif %}\
-            {{ commit.message | upper_first }}\
-    {% endfor %}
-{% endfor %}\n
-"""
-# template for the changelog footer
-footer = """
-<!-- generated by git-cliff -->
-"""
-# remove the leading and trailing s
-trim = true
-# postprocessors
-postprocessors = [
-  # { pattern = '<REPO>', replace = "https://github.com/orhun/git-cliff" }, # replace repository URL
-]
-
-[git]
-# parse the commits based on https://www.conventionalcommits.org
-conventional_commits = true
-# filter out the commits that are not conventional
-filter_unconventional = true
-# process each line of a commit as an individual commit
-split_commits = false
-# regex for preprocessing the commit messages
-commit_preprocessors = [
-  # Replace issue numbers
-  #{ pattern = '\((\w+\s)?#([0-9]+)\)', replace = "([#${2}](<REPO>/issues/${2}))"},
-  # Check spelling of the commit with https://github.com/crate-ci/typos
-  # If the spelling is incorrect, it will be automatically fixed.
-  #{ pattern = '.*', replace_command = 'typos --write-changes -' },
-]
-# regex for parsing and grouping commits
-commit_parsers = [
-  { message = "^feat", group = "<!-- 0 -->🚀 Features" },
-  { message = "^fix", group = "<!-- 1 -->🐛 Bug Fixes" },
-  { message = "^doc", group = "<!-- 3 -->📚 Documentation" },
-  { message = "^perf", group = "<!-- 4 -->⚡ Performance" },
-  { message = "^refactor", group = "<!-- 2 -->🚜 Refactor" },
-  { message = "^style", group = "<!-- 5 -->🎨 Styling" },
-  { message = "^test", group = "<!-- 6 -->🧪 Testing" },
-  { message = "^chore\\(release\\): prepare for", skip = true },
-  { message = "^chore\\(deps.*\\)", skip = true },
-  { message = "^chore\\(pr\\)", skip = true },
-  { message = "^chore\\(pull\\)", skip = true },
-  { message = "^chore|^ci", group = "<!-- 7 -->⚙️ Miscellaneous Tasks" },
-  { body = ".*security", group = "<!-- 8 -->🛡️ Security" },
-  { message = "^revert", group = "<!-- 9 -->◀️ Revert" },
-]
-# filter out the commits that are not matched by commit parsers
-filter_commits = false
-# sort the tags topologically
-topo_order = false
-# sort the commits inside sections by oldest/newest order
-sort_commits = "oldest"

do_release.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-set e
-
-PKGNAME=$(basename "$PWD")
-VERSION=$(git cliff --bumped-version --unreleased |cut -dv -f2)
-
-sed "s/^version:.*$/version: $VERSION/g" -i shard.yml
-git add shard.yml
-hace lint test
-git cliff --bump -u -p CHANGELOG.md
-git commit -a -m "bump: Release v$VERSION"
-hace static
-git tag "v$VERSION"
-git push --tags
-gh release create "v$VERSION" "bin/$PKGNAME-static-linux-amd64" "bin/$PKGNAME-static-linux-arm64" --title "Release v$VERSION" --notes "$(git cliff -l -s all)"

lexers/LiquidLexer.xml

@@ -127,3 +127,4 @@
     </state>
   </rules>
 </lexer>
+

lexers/VelocityLexer.xml

@@ -52,3 +52,4 @@
     </state>
   </rules>
 </lexer>
+

lexers/abap.xml

@@ -151,4 +151,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/abnf.xml

@@ -63,4 +63,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/actionscript.xml

@@ -65,4 +65,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/actionscript_3.xml

@@ -160,4 +160,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/ada.xml

@@ -318,4 +318,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/agda.xml

@@ -63,3 +63,4 @@
     </state>
   </rules>
 </lexer>
+

lexers/al.xml

@@ -72,4 +72,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/alloy.xml

@@ -55,3 +55,4 @@
     </state>
   </rules>
 </lexer>
+

lexers/angular2.xml

@@ -105,4 +105,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/antlr.xml

@@ -314,4 +314,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/apacheconf.xml

@@ -71,4 +71,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/apl.xml

@@ -56,4 +56,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/applescript.xml

@@ -127,4 +127,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/arangodb_aql.xml

@@ -171,4 +171,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/arduino.xml

@@ -306,4 +306,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/armasm.xml

@@ -123,4 +123,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/autohotkey.xml

@@ -75,3 +75,4 @@
     </state>
   </rules>
 </lexer>
+

lexers/autoit.xml

@@ -67,3 +67,4 @@
     </state>
   </rules>
 </lexer>
+

lexers/awk.xml

@@ -92,4 +92,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/ballerina.xml

@@ -94,4 +94,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/bash.xml

@@ -217,4 +217,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/bash_session.xml

@@ -22,4 +22,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/batchfile.xml

@@ -657,4 +657,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/bbcode.xml

@@ -19,3 +19,4 @@
     </state>
   </rules>
 </lexer>
+

lexers/bibtex.xml

@@ -149,4 +149,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/bicep.xml

@@ -81,4 +81,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/blitzbasic.xml

@@ -138,4 +138,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/bnf.xml

@@ -25,4 +25,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/bqn.xml

@@ -80,4 +80,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/brainfuck.xml

@@ -48,4 +48,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/c#.xml

@@ -118,4 +118,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/c++.xml

@@ -328,4 +328,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/cap_n_proto.xml

@@ -119,4 +119,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/cassandra_cql.xml

@@ -134,4 +134,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/ceylon.xml

@@ -148,4 +148,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/cfstatement.xml

@@ -89,4 +89,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/chaiscript.xml

@@ -131,4 +131,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/chapel.xml

@@ -140,4 +140,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/cheetah.xml

@@ -52,4 +52,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/cmake.xml

@@ -87,4 +87,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/cobol.xml

@@ -87,4 +87,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/coffeescript.xml

@@ -207,4 +207,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/common_lisp.xml

@@ -181,4 +181,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/coq.xml

@@ -133,4 +133,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/crystal.xml

@@ -0,0 +1,762 @@
+<lexer>
+  <config>
+    <name>Crystal</name>
+    <alias>cr</alias>
+    <alias>crystal</alias>
+    <filename>*.cr</filename>
+    <mime_type>text/x-crystal</mime_type>
+    <dot_all>true</dot_all>
+  </config>
+  <rules>
+    <state name="pa-intp-string">
+      <rule pattern="\\[\(]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="\(">
+        <token type="LiteralStringOther"/>
+        <push/>
+      </rule>
+      <rule pattern="\)">
+        <token type="LiteralStringOther"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="string-intp-escaped"/>
+      </rule>
+      <rule pattern="[\\#()]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="[^\\#()]+">
+        <token type="LiteralStringOther"/>
+      </rule>
+    </state>
+    <state name="ab-regex">
+      <rule pattern="\\[\\&lt;&gt;]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="&lt;">
+        <token type="LiteralStringRegex"/>
+        <push/>
+      </rule>
+      <rule pattern="&gt;[imsx]*">
+        <token type="LiteralStringRegex"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="string-intp"/>
+      </rule>
+      <rule pattern="[\\#&lt;&gt;]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="[^\\#&lt;&gt;]+">
+        <token type="LiteralStringRegex"/>
+      </rule>
+    </state>
+    <state name="cb-regex">
+      <rule pattern="\\[\\{}]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="\{">
+        <token type="LiteralStringRegex"/>
+        <push/>
+      </rule>
+      <rule pattern="\}[imsx]*">
+        <token type="LiteralStringRegex"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="string-intp"/>
+      </rule>
+      <rule pattern="[\\#{}]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="[^\\#{}]+">
+        <token type="LiteralStringRegex"/>
+      </rule>
+    </state>
+    <state name="simple-backtick">
+      <rule>
+        <include state="string-intp-escaped"/>
+      </rule>
+      <rule pattern="[^\\`#]+">
+        <token type="LiteralStringBacktick"/>
+      </rule>
+      <rule pattern="[\\#]">
+        <token type="LiteralStringBacktick"/>
+      </rule>
+      <rule pattern="`">
+        <token type="LiteralStringBacktick"/>
+        <pop depth="1"/>
+      </rule>
+    </state>
+    <state name="string-intp">
+      <rule pattern="#\{">
+        <token type="LiteralStringInterpol"/>
+        <push state="in-intp"/>
+      </rule>
+    </state>
+    <state name="interpolated-regex">
+      <rule>
+        <include state="string-intp"/>
+      </rule>
+      <rule pattern="[\\#]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="[^\\#]+">
+        <token type="LiteralStringRegex"/>
+      </rule>
+    </state>
+    <state name="cb-string">
+      <rule pattern="\\[\\{}]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="\{">
+        <token type="LiteralStringOther"/>
+        <push/>
+      </rule>
+      <rule pattern="\}">
+        <token type="LiteralStringOther"/>
+        <pop depth="1"/>
+      </rule>
+      <rule pattern="[\\#{}]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="[^\\#{}]+">
+        <token type="LiteralStringOther"/>
+      </rule>
+    </state>
+    <state name="in-macro-control">
+      <rule pattern="\{%">
+        <token type="LiteralStringInterpol"/>
+        <push/>
+      </rule>
+      <rule pattern="%\}">
+        <token type="LiteralStringInterpol"/>
+        <pop depth="1"/>
+      </rule>
+      <rule pattern="for\b|in\b">
+        <token type="Keyword"/>
+      </rule>
+      <rule>
+        <include state="root"/>
+      </rule>
+    </state>
+    <state name="interpolated-string">
+      <rule>
+        <include state="string-intp"/>
+      </rule>
+      <rule pattern="[\\#]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="[^\\#]+">
+        <token type="LiteralStringOther"/>
+      </rule>
+    </state>
+    <state name="in-macro-expr">
+      <rule pattern="\{\{">
+        <token type="LiteralStringInterpol"/>
+        <push/>
+      </rule>
+      <rule pattern="\}\}">
+        <token type="LiteralStringInterpol"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="root"/>
+      </rule>
+    </state>
+    <state name="simple-string">
+      <rule>
+        <include state="string-intp-escaped"/>
+      </rule>
+      <rule pattern="[^\\&#34;#]+">
+        <token type="LiteralStringDouble"/>
+      </rule>
+      <rule pattern="[\\#]">
+        <token type="LiteralStringDouble"/>
+      </rule>
+      <rule pattern="&#34;">
+        <token type="LiteralStringDouble"/>
+        <pop depth="1"/>
+      </rule>
+    </state>
+    <state name="cb-intp-string">
+      <rule pattern="\\[\{]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="\{">
+        <token type="LiteralStringOther"/>
+        <push/>
+      </rule>
+      <rule pattern="\}">
+        <token type="LiteralStringOther"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="string-intp-escaped"/>
+      </rule>
+      <rule pattern="[\\#{}]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="[^\\#{}]+">
+        <token type="LiteralStringOther"/>
+      </rule>
+    </state>
+    <state name="string-intp-escaped">
+      <rule>
+        <include state="string-intp"/>
+      </rule>
+      <rule>
+        <include state="string-escaped"/>
+      </rule>
+    </state>
+    <state name="sb-regex">
+      <rule pattern="\\[\\\[\]]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="\[">
+        <token type="LiteralStringRegex"/>
+        <push/>
+      </rule>
+      <rule pattern="\][imsx]*">
+        <token type="LiteralStringRegex"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="string-intp"/>
+      </rule>
+      <rule pattern="[\\#\[\]]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="[^\\#\[\]]+">
+        <token type="LiteralStringRegex"/>
+      </rule>
+    </state>
+    <state name="classname">
+      <rule pattern="[A-Z_]\w*">
+        <token type="NameClass"/>
+      </rule>
+      <rule pattern="(\()(\s*)([A-Z_]\w*)(\s*)(\))">
+        <bygroups>
+          <token type="Punctuation"/>
+          <token type="Text"/>
+          <token type="NameClass"/>
+          <token type="Text"/>
+          <token type="Punctuation"/>
+        </bygroups>
+      </rule>
+      <rule>
+        <pop depth="1"/>
+      </rule>
+    </state>
+    <state name="string-escaped">
+      <rule pattern="\\([\\befnstv#&#34;\&#39;]|x[a-fA-F0-9]{1,2}|[0-7]{1,3})">
+        <token type="LiteralStringEscape"/>
+      </rule>
+    </state>
+    <state name="sb-intp-string">
+      <rule pattern="\\[\[]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="\[">
+        <token type="LiteralStringOther"/>
+        <push/>
+      </rule>
+      <rule pattern="\]">
+        <token type="LiteralStringOther"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="string-intp-escaped"/>
+      </rule>
+      <rule pattern="[\\#\[\]]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="[^\\#\[\]]+">
+        <token type="LiteralStringOther"/>
+      </rule>
+    </state>
+    <state name="pa-regex">
+      <rule pattern="\\[\\()]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="\(">
+        <token type="LiteralStringRegex"/>
+        <push/>
+      </rule>
+      <rule pattern="\)[imsx]*">
+        <token type="LiteralStringRegex"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="string-intp"/>
+      </rule>
+      <rule pattern="[\\#()]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="[^\\#()]+">
+        <token type="LiteralStringRegex"/>
+      </rule>
+    </state>
+    <state name="in-attr">
+      <rule pattern="\[">
+        <token type="Operator"/>
+        <push/>
+      </rule>
+      <rule pattern="\]">
+        <token type="Operator"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="root"/>
+      </rule>
+    </state>
+    <state name="ab-intp-string">
+      <rule pattern="\\[&lt;]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="&lt;">
+        <token type="LiteralStringOther"/>
+        <push/>
+      </rule>
+      <rule pattern="&gt;">
+        <token type="LiteralStringOther"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="string-intp-escaped"/>
+      </rule>
+      <rule pattern="[\\#&lt;&gt;]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="[^\\#&lt;&gt;]+">
+        <token type="LiteralStringOther"/>
+      </rule>
+    </state>
+    <state name="in-intp">
+      <rule pattern="\{">
+        <token type="LiteralStringInterpol"/>
+        <push/>
+      </rule>
+      <rule pattern="\}">
+        <token type="LiteralStringInterpol"/>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <include state="root"/>
+      </rule>
+    </state>
+    <state name="end-part">
+      <rule pattern=".+">
+        <token type="CommentPreproc"/>
+        <pop depth="1"/>
+      </rule>
+    </state>
+    <state name="root">
+      <rule pattern="#.*?$">
+        <token type="CommentSingle"/>
+      </rule>
+      <rule pattern="(instance_sizeof|pointerof|protected|abstract|require|private|include|unless|typeof|sizeof|return|extend|ensure|rescue|ifdef|super|break|begin|until|while|elsif|yield|next|when|else|then|case|with|end|asm|if|do|as|of)\b">
+        <token type="Keyword"/>
+      </rule>
+      <rule pattern="(false|true|nil)\b">
+        <token type="KeywordConstant"/>
+      </rule>
+      <rule pattern="(module|lib)(\s+)([a-zA-Z_]\w*(?:::[a-zA-Z_]\w*)*)">
+        <bygroups>
+          <token type="Keyword"/>
+          <token type="Text"/>
+          <token type="NameNamespace"/>
+        </bygroups>
+      </rule>
+      <rule pattern="(def|fun|macro)(\s+)((?:[a-zA-Z_]\w*::)*)">
+        <bygroups>
+          <token type="Keyword"/>
+          <token type="Text"/>
+          <token type="NameNamespace"/>
+        </bygroups>
+        <push state="funcname"/>
+      </rule>
+      <rule pattern="def(?=[*%&amp;^`~+-/\[&lt;&gt;=])">
+        <token type="Keyword"/>
+        <push state="funcname"/>
+      </rule>
+      <rule pattern="(class|struct|union|type|alias|enum)(\s+)((?:[a-zA-Z_]\w*::)*)">
+        <bygroups>
+          <token type="Keyword"/>
+          <token type="Text"/>
+          <token type="NameNamespace"/>
+        </bygroups>
+        <push state="classname"/>
+      </rule>
+      <rule pattern="(self|out|uninitialized)\b|(is_a|responds_to)\?">
+        <token type="KeywordPseudo"/>
+      </rule>
+      <rule pattern="(def_equals_and_hash|assert_responds_to|forward_missing_to|def_equals|property|def_hash|parallel|delegate|debugger|getter|record|setter|spawn|pp)\b">
+        <token type="NameBuiltinPseudo"/>
+      </rule>
+      <rule pattern="getter[!?]|property[!?]|__(DIR|FILE|LINE)__\b">
+        <token type="NameBuiltinPseudo"/>
+      </rule>
+      <rule pattern="(?&lt;!\.)(get_stack_top|StaticArray|Concurrent|with_color|Reference|Scheduler|read_line|Exception|at_exit|Pointer|Channel|Float64|sprintf|Float32|Process|Object|Struct|caller|UInt16|UInt32|UInt64|system|future|Number|printf|String|Symbol|Int32|Range|Slice|Regex|Mutex|sleep|Array|Class|raise|Tuple|Deque|delay|Float|Int16|print|abort|Value|UInt8|Int64|puts|Proc|File|Void|exit|fork|Bool|Char|gets|lazy|loop|main|rand|Enum|Int8|Time|Hash|Set|Box|Nil|Dir|Int|p)\b">
+        <token type="NameBuiltin"/>
+      </rule>
+      <rule pattern="(?&lt;!\w)(&lt;&lt;-?)([&#34;`\&#39;]?)([a-zA-Z_]\w*)(\2)(.*?\n)">
+        <token type="LiteralStringHeredoc"/>
+      </rule>
+      <rule pattern="(&lt;&lt;-?)(&#34;|\&#39;)()(\2)(.*?\n)">
+        <token type="LiteralStringHeredoc"/>
+      </rule>
+      <rule pattern="__END__">
+        <token type="CommentPreproc"/>
+        <push state="end-part"/>
+      </rule>
+      <rule pattern="(?:^|(?&lt;=[=&lt;&gt;~!:])|(?&lt;=(?:\s|;)when\s)|(?&lt;=(?:\s|;)or\s)|(?&lt;=(?:\s|;)and\s)|(?&lt;=\.index\s)|(?&lt;=\.scan\s)|(?&lt;=\.sub\s)|(?&lt;=\.sub!\s)|(?&lt;=\.gsub\s)|(?&lt;=\.gsub!\s)|(?&lt;=\.match\s)|(?&lt;=(?:\s|;)if\s)|(?&lt;=(?:\s|;)elsif\s)|(?&lt;=^when\s)|(?&lt;=^index\s)|(?&lt;=^scan\s)|(?&lt;=^sub\s)|(?&lt;=^gsub\s)|(?&lt;=^sub!\s)|(?&lt;=^gsub!\s)|(?&lt;=^match\s)|(?&lt;=^if\s)|(?&lt;=^elsif\s))(\s*)(/)">
+        <bygroups>
+          <token type="Text"/>
+          <token type="LiteralStringRegex"/>
+        </bygroups>
+        <push state="multiline-regex"/>
+      </rule>
+      <rule pattern="(?&lt;=\(|,|\[)/">
+        <token type="LiteralStringRegex"/>
+        <push state="multiline-regex"/>
+      </rule>
+      <rule pattern="(\s+)(/)(?![\s=])">
+        <bygroups>
+          <token type="Text"/>
+          <token type="LiteralStringRegex"/>
+        </bygroups>
+        <push state="multiline-regex"/>
+      </rule>
+      <rule pattern="(0o[0-7]+(?:_[0-7]+)*(?:_?[iu][0-9]+)?)\b(\s*)([/?])?">
+        <bygroups>
+          <token type="LiteralNumberOct"/>
+          <token type="Text"/>
+          <token type="Operator"/>
+        </bygroups>
+      </rule>
+      <rule pattern="(0x[0-9A-Fa-f]+(?:_[0-9A-Fa-f]+)*(?:_?[iu][0-9]+)?)\b(\s*)([/?])?">
+        <bygroups>
+          <token type="LiteralNumberHex"/>
+          <token type="Text"/>
+          <token type="Operator"/>
+        </bygroups>
+      </rule>
+      <rule pattern="(0b[01]+(?:_[01]+)*(?:_?[iu][0-9]+)?)\b(\s*)([/?])?">
+        <bygroups>
+          <token type="LiteralNumberBin"/>
+          <token type="Text"/>
+          <token type="Operator"/>
+        </bygroups>
+      </rule>
+      <rule pattern="((?:0(?![0-9])|[1-9][\d_]*)(?:\.\d[\d_]*)(?:e[+-]?[0-9]+)?(?:_?f[0-9]+)?)(\s*)([/?])?">
+        <bygroups>
+          <token type="LiteralNumberFloat"/>
+          <token type="Text"/>
+          <token type="Operator"/>
+        </bygroups>
+      </rule>
+      <rule pattern="((?:0(?![0-9])|[1-9][\d_]*)(?:\.\d[\d_]*)?(?:e[+-]?[0-9]+)(?:_?f[0-9]+)?)(\s*)([/?])?">
+        <bygroups>
+          <token type="LiteralNumberFloat"/>
+          <token type="Text"/>
+          <token type="Operator"/>
+        </bygroups>
+      </rule>
+      <rule pattern="((?:0(?![0-9])|[1-9][\d_]*)(?:\.\d[\d_]*)?(?:e[+-]?[0-9]+)?(?:_?f[0-9]+))(\s*)([/?])?">
+        <bygroups>
+          <token type="LiteralNumberFloat"/>
+          <token type="Text"/>
+          <token type="Operator"/>
+        </bygroups>
+      </rule>
+      <rule pattern="(0\b|[1-9][\d]*(?:_\d+)*(?:_?[iu][0-9]+)?)\b(\s*)([/?])?">
+        <bygroups>
+          <token type="LiteralNumberInteger"/>
+          <token type="Text"/>
+          <token type="Operator"/>
+        </bygroups>
+      </rule>
+      <rule pattern="@@[a-zA-Z_]\w*">
+        <token type="NameVariableClass"/>
+      </rule>
+      <rule pattern="@[a-zA-Z_]\w*">
+        <token type="NameVariableInstance"/>
+      </rule>
+      <rule pattern="\$\w+">
+        <token type="NameVariableGlobal"/>
+      </rule>
+      <rule pattern="\$[!@&amp;`\&#39;+~=/\\,;.&lt;&gt;_*$?:&#34;^-]">
+        <token type="NameVariableGlobal"/>
+      </rule>
+      <rule pattern="\$-[0adFiIlpvw]">
+        <token type="NameVariableGlobal"/>
+      </rule>
+      <rule pattern="::">
+        <token type="Operator"/>
+      </rule>
+      <rule>
+        <include state="strings"/>
+      </rule>
+      <rule pattern="\?(\\[MC]-)*(\\([\\befnrtv#&#34;\&#39;]|x[a-fA-F0-9]{1,2}|[0-7]{1,3})|\S)(?!\w)">
+        <token type="LiteralStringChar"/>
+      </rule>
+      <rule pattern="[A-Z][A-Z_]+\b">
+        <token type="NameConstant"/>
+      </rule>
+      <rule pattern="\{%">
+        <token type="LiteralStringInterpol"/>
+        <push state="in-macro-control"/>
+      </rule>
+      <rule pattern="\{\{">
+        <token type="LiteralStringInterpol"/>
+        <push state="in-macro-expr"/>
+      </rule>
+      <rule pattern="(@\[)(\s*)([A-Z]\w*)">
+        <bygroups>
+          <token type="Operator"/>
+          <token type="Text"/>
+          <token type="NameDecorator"/>
+        </bygroups>
+        <push state="in-attr"/>
+      </rule>
+      <rule pattern="(\.|::)(\[\]\?|&lt;=&gt;|===|\[\]=|&gt;&gt;|&amp;&amp;|\*\*|\[\]|\|\||&gt;=|=~|!~|&lt;&lt;|&lt;=|!=|==|&lt;|/|=|-|\+|&gt;|\*|&amp;|%|\^|!|\||~)">
+        <bygroups>
+          <token type="Operator"/>
+          <token type="NameOperator"/>
+        </bygroups>
+      </rule>
+      <rule pattern="(\.|::)([a-zA-Z_]\w*[!?]?|[*%&amp;^`~+\-/\[&lt;&gt;=])">
+        <bygroups>
+          <token type="Operator"/>
+          <token type="Name"/>
+        </bygroups>
+      </rule>
+      <rule pattern="[a-zA-Z_]\w*(?:[!?](?!=))?">
+        <token type="Name"/>
+      </rule>
+      <rule pattern="(\[|\]\??|\*\*|&lt;=&gt;?|&gt;=|&lt;&lt;?|&gt;&gt;?|=~|===|!~|&amp;&amp;?|\|\||\.{1,3})">
+        <token type="Operator"/>
+      </rule>
+      <rule pattern="[-+/*%=&lt;&gt;&amp;!^|~]=?">
+        <token type="Operator"/>
+      </rule>
+      <rule pattern="[(){};,/?:\\]">
+        <token type="Punctuation"/>
+      </rule>
+      <rule pattern="\s+">
+        <token type="Text"/>
+      </rule>
+    </state>
+    <state name="multiline-regex">
+      <rule>
+        <include state="string-intp"/>
+      </rule>
+      <rule pattern="\\\\">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="\\/">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="[\\#]">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="[^\\/#]+">
+        <token type="LiteralStringRegex"/>
+      </rule>
+      <rule pattern="/[imsx]*">
+        <token type="LiteralStringRegex"/>
+        <pop depth="1"/>
+      </rule>
+    </state>
+    <state name="ab-string">
+      <rule pattern="\\[\\&lt;&gt;]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="&lt;">
+        <token type="LiteralStringOther"/>
+        <push/>
+      </rule>
+      <rule pattern="&gt;">
+        <token type="LiteralStringOther"/>
+        <pop depth="1"/>
+      </rule>
+      <rule pattern="[\\#&lt;&gt;]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="[^\\#&lt;&gt;]+">
+        <token type="LiteralStringOther"/>
+      </rule>
+    </state>
+    <state name="pa-string">
+      <rule pattern="\\[\\()]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="\(">
+        <token type="LiteralStringOther"/>
+        <push/>
+      </rule>
+      <rule pattern="\)">
+        <token type="LiteralStringOther"/>
+        <pop depth="1"/>
+      </rule>
+      <rule pattern="[\\#()]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="[^\\#()]+">
+        <token type="LiteralStringOther"/>
+      </rule>
+    </state>
+    <state name="strings">
+      <rule pattern="\:@{0,2}[a-zA-Z_]\w*[!?]?">
+        <token type="LiteralStringSymbol"/>
+      </rule>
+      <rule pattern="\:@{0,2}(\[\]\?|&lt;=&gt;|===|\[\]=|&gt;&gt;|&amp;&amp;|\*\*|\[\]|\|\||&gt;=|=~|!~|&lt;&lt;|&lt;=|!=|==|&lt;|/|=|-|\+|&gt;|\*|&amp;|%|\^|!|\||~)">
+        <token type="LiteralStringSymbol"/>
+      </rule>
+      <rule pattern=":&#39;(\\\\|\\&#39;|[^&#39;])*&#39;">
+        <token type="LiteralStringSymbol"/>
+      </rule>
+      <rule pattern="&#39;(\\\\|\\&#39;|[^&#39;]|\\[^&#39;\\]+)&#39;">
+        <token type="LiteralStringChar"/>
+      </rule>
+      <rule pattern=":&#34;">
+        <token type="LiteralStringSymbol"/>
+        <push state="simple-sym"/>
+      </rule>
+      <rule pattern="([a-zA-Z_]\w*)(:)(?!:)">
+        <bygroups>
+          <token type="LiteralStringSymbol"/>
+          <token type="Punctuation"/>
+        </bygroups>
+      </rule>
+      <rule pattern="&#34;">
+        <token type="LiteralStringDouble"/>
+        <push state="simple-string"/>
+      </rule>
+      <rule pattern="(?&lt;!\.)`">
+        <token type="LiteralStringBacktick"/>
+        <push state="simple-backtick"/>
+      </rule>
+      <rule pattern="%\{">
+        <token type="LiteralStringOther"/>
+        <push state="cb-intp-string"/>
+      </rule>
+      <rule pattern="%[wi]\{">
+        <token type="LiteralStringOther"/>
+        <push state="cb-string"/>
+      </rule>
+      <rule pattern="%r\{">
+        <token type="LiteralStringRegex"/>
+        <push state="cb-regex"/>
+      </rule>
+      <rule pattern="%\[">
+        <token type="LiteralStringOther"/>
+        <push state="sb-intp-string"/>
+      </rule>
+      <rule pattern="%[wi]\[">
+        <token type="LiteralStringOther"/>
+        <push state="sb-string"/>
+      </rule>
+      <rule pattern="%r\[">
+        <token type="LiteralStringRegex"/>
+        <push state="sb-regex"/>
+      </rule>
+      <rule pattern="%\(">
+        <token type="LiteralStringOther"/>
+        <push state="pa-intp-string"/>
+      </rule>
+      <rule pattern="%[wi]\(">
+        <token type="LiteralStringOther"/>
+        <push state="pa-string"/>
+      </rule>
+      <rule pattern="%r\(">
+        <token type="LiteralStringRegex"/>
+        <push state="pa-regex"/>
+      </rule>
+      <rule pattern="%&lt;">
+        <token type="LiteralStringOther"/>
+        <push state="ab-intp-string"/>
+      </rule>
+      <rule pattern="%[wi]&lt;">
+        <token type="LiteralStringOther"/>
+        <push state="ab-string"/>
+      </rule>
+      <rule pattern="%r&lt;">
+        <token type="LiteralStringRegex"/>
+        <push state="ab-regex"/>
+      </rule>
+      <rule pattern="(%r([\W_]))((?:\\\2|(?!\2).)*)(\2[imsx]*)">
+        <token type="LiteralString"/>
+      </rule>
+      <rule pattern="(%[wi]([\W_]))((?:\\\2|(?!\2).)*)(\2)">
+        <token type="LiteralString"/>
+      </rule>
+      <rule pattern="(?&lt;=[-+/*%=&lt;&gt;&amp;!^|~,(])(\s*)(%([\t ])(?:(?:\\\3|(?!\3).)*)\3)">
+        <bygroups>
+          <token type="Text"/>
+          <token type="LiteralStringOther"/>
+          <token type="None"/>
+        </bygroups>
+      </rule>
+      <rule pattern="^(\s*)(%([\t ])(?:(?:\\\3|(?!\3).)*)\3)">
+        <bygroups>
+          <token type="Text"/>
+          <token type="LiteralStringOther"/>
+          <token type="None"/>
+        </bygroups>
+      </rule>
+      <rule pattern="(%([\[{(&lt;]))((?:\\\2|(?!\2).)*)(\2)">
+        <token type="LiteralString"/>
+      </rule>
+    </state>
+    <state name="sb-string">
+      <rule pattern="\\[\\\[\]]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="\[">
+        <token type="LiteralStringOther"/>
+        <push/>
+      </rule>
+      <rule pattern="\]">
+        <token type="LiteralStringOther"/>
+        <pop depth="1"/>
+      </rule>
+      <rule pattern="[\\#\[\]]">
+        <token type="LiteralStringOther"/>
+      </rule>
+      <rule pattern="[^\\#\[\]]+">
+        <token type="LiteralStringOther"/>
+      </rule>
+    </state>
+    <state name="funcname">
+      <rule pattern="(?:([a-zA-Z_]\w*)(\.))?([a-zA-Z_]\w*[!?]?|\*\*?|[-+]@?|[/%&amp;|^`~]|\[\]=?|&lt;&lt;|&gt;&gt;|&lt;=?&gt;|&gt;=?|===?)">
+        <bygroups>
+          <token type="NameClass"/>
+          <token type="Operator"/>
+          <token type="NameFunction"/>
+        </bygroups>
+        <pop depth="1"/>
+      </rule>
+      <rule>
+        <pop depth="1"/>
+      </rule>
+    </state>
+    <state name="simple-sym">
+      <rule>
+        <include state="string-escaped"/>
+      </rule>
+      <rule pattern="[^\\&#34;#]+">
+        <token type="LiteralStringSymbol"/>
+      </rule>
+      <rule pattern="[\\#]">
+        <token type="LiteralStringSymbol"/>
+      </rule>
+      <rule pattern="&#34;">
+        <token type="LiteralStringSymbol"/>
+        <pop depth="1"/>
+      </rule>
+    </state>
+  </rules>
+</lexer>

lexers/css.xml

@@ -320,4 +320,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/cython.xml

@@ -369,4 +369,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/d.xml

@@ -130,4 +130,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/dart.xml

@@ -210,4 +210,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/desktop_entry.xml

@@ -14,4 +14,4 @@
       <rule pattern="([-A-Za-z0-9]+)(\[[^\] \t=]+\])?([ \t]*)(=)([ \t]*)([^\n]*)([ \t\n]*\n)"><bygroups><token type="NameAttribute"/><token type="NameNamespace"/><token type="TextWhitespace"/><token type="Operator"/><token type="TextWhitespace"/><token type="LiteralString"/><token type="TextWhitespace"/></bygroups></rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/diff.xml

@@ -49,4 +49,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/django_jinja.xml

@@ -150,4 +150,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/docker.xml

@@ -54,4 +54,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/dtd.xml

@@ -165,4 +165,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/dylan.xml

@@ -173,4 +173,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/ebnf.xml

@@ -87,4 +87,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/elixir.xml

@@ -741,4 +741,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/elm.xml

@@ -116,4 +116,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/emacslisp.xml

@@ -129,4 +129,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/erlang.xml

@@ -163,4 +163,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/factor.xml

@@ -409,4 +409,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/fennel.xml

@@ -65,4 +65,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/fish.xml

@@ -156,4 +156,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/forth.xml

@@ -75,4 +75,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/fortranfixed.xml

@@ -68,4 +68,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/gherkin.xml

@@ -260,4 +260,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/glsl.xml

@@ -62,4 +62,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/gnuplot.xml

@@ -286,4 +286,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/go_template.xml

@@ -111,4 +111,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/graphql.xml

@@ -85,4 +85,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/handlebars.xml

@@ -144,4 +144,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/haskell.xml

@@ -269,4 +269,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/hcl.xml

@@ -140,4 +140,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/hexdump.xml

@@ -186,4 +186,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/hlb.xml

@@ -146,4 +146,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/html.xml

@@ -156,4 +156,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/hy.xml

@@ -101,4 +101,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/idris.xml

@@ -213,4 +213,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>

lexers/igor.xml

@@ -44,4 +44,4 @@
       </rule>
     </state>
   </rules>
-</lexer>
+</lexer>