Roberto Alsina
8dc599ba23
Cable clamp for multiple cables fastened with m3x8 screws
2022-08-05 10:08:17 -03:00
Roberto Alsina
ed989fa000
* Wider / deeper channel to slide the plugs in
...
* Had miscalculated bezels, it seems.
2022-07-24 17:36:12 -03:00
Roberto Alsina
0f90755ed2
Simpler rear mount
2022-07-24 15:05:31 -03:00
Roberto Alsina
c2caea9039
Large design change.
...
While not as pretty this should work much better mechanically
based on the results from the last test print.
* Added room for the plugs to slide from the middle outwards
* Made back reinforcement much larger so it connects the piece that is
split by that plug channel
* Removed separate board cutout (not needed anymore)
* Fix cable channel (was cutting through end caps)
* Change shelling parameters so it keeps a cap on both ends
* Adjusted segment breaks for new reality
* TODO: adjust rear hinge design to be flat and not "envolving"
2022-07-24 11:11:16 -03:00
Roberto Alsina
4a4d11bd95
merged
2022-07-24 10:31:48 -03:00
Roberto Alsina
d0c1a2cdae
Create STL for case pieces too
2022-07-24 10:30:22 -03:00
Roberto Alsina
0b605c19fe
merged
2022-07-24 10:30:03 -03:00
Roberto Alsina
28131b370e
Started plug cutout
2022-07-24 10:29:07 -03:00
Roberto Alsina
5dd7b5578f
tweaks
2022-07-23 16:12:56 -03:00
Roberto Alsina
027276c4eb
Fix rear mount
2022-07-23 14:11:30 -03:00
Roberto Alsina
e61be357ee
Good upper arm
2022-07-23 14:05:21 -03:00
Roberto Alsina
84cb4ee0ed
Initial upper arm (buggy)
2022-07-23 12:57:54 -03:00
Roberto Alsina
fd31e96623
Lower arm model
2022-07-23 11:57:47 -03:00
Roberto Alsina
a5f39d740e
Make hinge not-square
2022-07-23 11:26:55 -03:00
Roberto Alsina
1aef3f05cb
Hinge in place
2022-07-23 10:24:08 -03:00
Roberto Alsina
e19a2f7aff
Start integrating the hinge (still buggy)
2022-07-23 10:16:47 -03:00
Roberto Alsina
10bac1c4ed
Start integrating the hinge (buggy)
2022-07-23 10:13:27 -03:00
Roberto Alsina
246338fc18
Start integrating the hinge
2022-07-23 10:07:56 -03:00
Roberto Alsina
f42566d13a
Started on the hinge
2022-07-22 18:23:27 -03:00
Roberto Alsina
265d50e329
Thicker shell, cable relief space
2022-07-22 14:38:08 -03:00
Roberto Alsina
08100f5ee9
After testing, this holw radius works nicely
2022-07-22 14:05:50 -03:00
Roberto Alsina
d309b22d98
Adjust hole size for threaded insert
2022-07-22 13:38:25 -03:00
Roberto Alsina
a2bca28f95
Save material, nicer cut, thinner middle
2022-07-22 13:01:44 -03:00
Roberto Alsina
9336d89414
Use actual M3 threaded insert dimensions and recommended hole sizes
2022-07-22 10:13:21 -03:00
Roberto Alsina
db646b9da2
Added circuit board cutout and rearranged things so they made sense mechanically
2022-07-22 10:11:25 -03:00
Roberto Alsina
232b2c7ee8
Cable hole was on the wrong side
2022-07-22 09:58:36 -03:00
Roberto Alsina
3b437fa109
cleanup
2022-07-22 09:51:31 -03:00
Roberto Alsina
c568af0e39
thickness
2022-07-22 08:13:35 -03:00
Roberto Alsina
d39645878e
threaded inserts parametricos
2022-07-22 08:05:59 -03:00
Roberto Alsina
061fa1ad95
Refuerzo y agujeros para threaded insert
2022-07-22 07:52:39 -03:00
Roberto Alsina
d9d44fb2bb
Refuerzo y agujeros para threaded insert
2022-07-22 07:52:26 -03:00
Roberto Alsina
17588515d2
Marcas de corte
2022-07-21 23:00:37 -03:00
Roberto Alsina
3ad39533b6
Caja básica
2022-07-21 22:00:45 -03:00
Roberto Alsina
1a94a3cbba
inicial
2022-07-21 21:26:36 -03:00
Roberto Alsina