895e24575e
Fit into resin printer volume, make holes larger because resin doesn't melt
2022-11-30 11:48:28 -03:00
e4a011f5bd
Single mounting beam at the back
2022-11-30 07:43:14 -03:00
a2932a4e49
Screw heads are a bit bigger than expected
2022-11-29 09:27:15 -03:00
2a48edb3cf
Mounting pillars and screwholes to join top and bottom cases
2022-11-28 15:09:49 -03:00
f549fb32b0
Thicker walls
2022-11-28 12:19:56 -03:00
db5e874d91
Fix screen holder split, add cutout for kbd cable
2022-11-28 11:26:23 -03:00
f01e5a92ee
bump
2022-11-28 10:36:18 -03:00
59882af24f
Shorter screen holder, rounded top, screen slightly slower
2022-11-25 18:15:42 -03:00
6e8869363e
Refactor, comments
2022-11-25 17:11:31 -03:00
bf1f0cc4ce
Missing files, screen mount simplified
2022-11-25 14:46:30 -03:00
e9b3a42564
More work on the screen mount
2022-11-25 12:28:39 -03:00
b8d902ea11
Basic screen bezels
2022-11-24 17:45:59 -03:00
8534d25e4b
Make the stand a bit taller to allow cable to pass below
2022-11-24 14:45:43 -03:00
8b152fc844
Make the stand a bit taller to allow cable to pass below
2022-11-24 14:44:17 -03:00
c5b2d68518
Prototype CPU holder
2022-11-24 11:24:38 -03:00
18a8e9a904
Add power switch hole
2022-11-24 10:30:05 -03:00
85d4fb661f
Built
2022-11-24 09:55:09 -03:00
c127e5f34b
Thicker walls in the battery holder
2022-11-24 09:54:11 -03:00
f9987f43e9
kbd width was wrong
2022-11-24 09:51:53 -03:00
6f15cd32d5
battery holder tweak
2022-11-24 09:51:40 -03:00
6e01b44b52
USB inlet port
2022-11-23 10:25:10 -03:00
897e314f9e
* Round stands
...
* Battery holder
* Power cable cutoff
* Dimensional fixes
2022-11-22 15:41:47 -03:00
df1ee0d425
Make it fit in the printer
2022-11-15 16:04:54 -03:00
4114adb49a
Split in cadquery
2022-11-15 16:01:20 -03:00
c4bae182c6
Split in quad
2022-11-15 15:24:52 -03:00
9f295d921e
Split in quad
2022-11-15 15:24:45 -03:00
19c8679df0
Basic case with kbd standoffs, good for a dry fit
2022-11-15 15:03:48 -03:00
4267a8a384
Modelo de canilla para la cocina
2022-11-09 10:24:23 -03:00
ad79dd78ed
Slightly bigger cable hole
2022-08-05 11:50:07 -03:00
8dc599ba23
Cable clamp for multiple cables fastened with m3x8 screws
2022-08-05 10:08:17 -03:00
ed989fa000
* Wider / deeper channel to slide the plugs in
...
* Had miscalculated bezels, it seems.
2022-07-24 17:36:12 -03:00
0f90755ed2
Simpler rear mount
2022-07-24 15:05:31 -03:00
c2caea9039
Large design change.
...
While not as pretty this should work much better mechanically
based on the results from the last test print.
* Added room for the plugs to slide from the middle outwards
* Made back reinforcement much larger so it connects the piece that is
split by that plug channel
* Removed separate board cutout (not needed anymore)
* Fix cable channel (was cutting through end caps)
* Change shelling parameters so it keeps a cap on both ends
* Adjusted segment breaks for new reality
* TODO: adjust rear hinge design to be flat and not "envolving"
2022-07-24 11:11:16 -03:00
4a4d11bd95
merged
2022-07-24 10:31:48 -03:00
d0c1a2cdae
Create STL for case pieces too
2022-07-24 10:30:22 -03:00
0b605c19fe
merged
2022-07-24 10:30:03 -03:00
28131b370e
Started plug cutout
2022-07-24 10:29:07 -03:00
5dd7b5578f
tweaks
2022-07-23 16:12:56 -03:00
027276c4eb
Fix rear mount
2022-07-23 14:11:30 -03:00
e61be357ee
Good upper arm
2022-07-23 14:05:21 -03:00
84cb4ee0ed
Initial upper arm (buggy)
2022-07-23 12:57:54 -03:00
fd31e96623
Lower arm model
2022-07-23 11:57:47 -03:00
a5f39d740e
Make hinge not-square
2022-07-23 11:26:55 -03:00
1aef3f05cb
Hinge in place
2022-07-23 10:24:08 -03:00
e19a2f7aff
Start integrating the hinge (still buggy)
2022-07-23 10:16:47 -03:00
10bac1c4ed
Start integrating the hinge (buggy)
2022-07-23 10:13:27 -03:00
246338fc18
Start integrating the hinge
2022-07-23 10:07:56 -03:00
f42566d13a
Started on the hinge
2022-07-22 18:23:27 -03:00
265d50e329
Thicker shell, cable relief space
2022-07-22 14:38:08 -03:00
08100f5ee9
After testing, this holw radius works nicely
2022-07-22 14:05:50 -03:00
